Send Quote Requests to info@automatedpt.com

Motion Control

 Heat sealer with cutter

Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com

ASDA-A3

7

EV1 empty-pack prevention

EV2 miscutting prevention

EV3 position reset after

alarm occurrence

DI7

Mark sensor for

synchronous Capture axis

1. Settings for synchronous Capture axis:

Enable the synchronous Capture axis when enabling the E-Cam.

PR#20 (I)

Write

DLY=[0] 0 ms

P5.039=0x0000

PR#21 (I)

Write

DLY=[1] 1 ms

P5.088=

0x00000000

PR#22 (I)

Write

DLY=[0] 0 ms

P5.038=1

PR#20

PR#21

PR#22

PR#23

PR#24

PR#25

PR#23 (I)

Write

DLY=[1] 1 ms

P1.019=0x0001

PR#24 (I)

Write

DLY=[0] 0 ms

P5.039=0x2021

PR#25 (I)

Write

DLY=[1] 1 ms

P5.088=

0x0000C253

Disables the Capture and E-Cam functions. Disable the capturing and E-Cam

functions before using the PR commands to set the parameters for high-speed

position capturing and E-Cam.

Sets the amount to capture.

Enables the Cyclic Capture mode.

Enables the high-speed Capture function and sets the pulse source.

Enables the E-Cam function. Sets the synchronous Capture axis as the source

for the master axis. Regards the capturing action as the clutch engagement

timing. Sets the clutch to remain engaged when an alarm occurs or the servo is

off, enter the cyclic mode after the clutch disengages, and reduce the speed

variation to that of the pre-engage status.

7-170

Send Quote Requests to info@automatedpt.com

Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com