Send Quote Requests to info@automatedpt.com
Motion Control
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
ASDA-A3
7
After creating an E-Cam curve based on the maximum moving distance of the cutting axis, set the
master pulse number of disengaging time (P5.089) according to the cutting length. After the
disengaging pulse number is reached or the cutting complete signal is received, the clutch
disengages and continues with a zero-speed PR speed command to stop the cutter. Then, it uses
another PR position command to return the cutter to the initial position, as shown in Figure 7.3.8.5.
The setting methods are as follows:
1. Master axis signal source: set P5.088.Y to 0; it means the source of the master axis is the
capturing axis. In the Capture function, this capturing axis refers to the setting of P5.039.Y
for the signal source of the master axis.
2. Engagement condition: set P5.088.Z to 2; it means the clutch engages as soon as the first
data is captured and the signal is input through DI7 to the servo drive.
3. Disengagement condition: set P5.088.U to E; it means the clutch disengages when the
master axis pulse number reaches the pulse number set in P5.089, the slave axis
decelerates to stop, and the E-Cam function is disabled.
4. To set the subsequent PR procedure after the clutch disengages, set the PR number to be
executed in P5.088.BA in hexadecimal.
5. Set the PR procedures:
Procedure 1: set the PR commands for execution when the cutting machine is activated.
PR#1 confirms the Capture function is disabled. PR#2 confirms the E-Cam function is
disabled. PR#3 jumps to PR#C. PR#C sets the capturing amount to 1. PR#D enables the
Capture function. PR#E enables the E-Cam function.
Procedure 2: set the subsequent PR commands after the clutch disengages. PR#A sets
the zero-speed command to stop the cutting axis. PR#B sets the position command to
return the cutting axis to the initial position.
PR#1 (I)
Write
DLY=[0] 0 ms
P5.039=0x2020
PR#2 (I)
Write
DLY=[0] 0 ms
P5.088=
0x000AE200
PR#3 (I)
Jump
DLY=[0] 0 ms
PR#C
PR#A (I)
Speed
DLY=[0] 0 ms
0 rpm
PR#B
Position
DLY=[0] 0 ms
0 PUU
ABS
1000 rpm
PR#C (I)
Write
DLY=[0] 0 ms
P5.038=1
PR#D (I)
Write
DLY=[0] 0 ms
P5.039=0x2021
PR#E (I)
Write
DLY=[0] 0 ms
P5.088=
0x000AE201
7-142
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com