Send Quote Requests to info@automatedpt.com

ASDA-A3

Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com

Wiring

Power cable

Step 5:

Plug the terminal into the connector.

 Refer to Section 3.1.4.1 for pin

assignment of power connectors.

 Refer to Section 3.5 for pin assignment

of encoder connectors.

Brake cable

(C) (B) (A)

Step 6:

2

Put the connector in the housing, and secure

the (C) rubber ring, (B) compression ring,

and (A) seals nut to the housing in

1

sequence.

Use a wrench to lock the seals nut to the

housing to complete the wiring.

3

Note the following:

Cable exit direction

towards motor shaft

Cable exit direction

towards encoder

Illustrations for the cable exit direction.

Copper conductor

Insulation

The green highlighted area on the terminal is

where you crimp the copper conductor.

The blue highlighted area on the terminal is

where you crimp the insulation wire.

Refer to Section 3.1.6.1 for the wire

diameters of terminals.

Power cable of

bulkhead connectors

(cable exit direction towards

motor shaft)

Power cable of

bulkhead connectors

(cable exit direction towards

encoder)

Brake cable

Encoder cable

It is advisable to tighten the connector to the

motor at the torque of 0.15 Nm.

Send Quote Requests to info@automatedpt.com

Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com

3-51