!     Copyright (c) 2010 by
!   CGS Computer Graphic Systems GmbH, Hainburg, Germany
!
! This software is furnished under a license and may be used and  copied
! only  in  accordance  with  the  terms  of  such  license and with the
! inclusion of the above copyright notice.  This software or  any  other
! copies  thereof may not be provided or otherwise made available to any
! other person.  No title to and ownership of  the  software  is  hereby
! transferred.
!
! The information in this software is subject to change  without  notice
! and  should  not  be  construed  as  a  commitment by Computer Graphic
! Systems GmbH. 
!
! CGS assumes no responsibility  for  the  use  or  reliability  of  its
! software on equipment which is not supplied by CGS.

!++
! FACILITY:
!   ORIS translation system
!
! ABSTRACT:
!   This module contains translations for texts in wpf dialogs. The name of
!   this file indicates which language this is for, _deu for Germany and so on.
!
! ENVIRONMENT:
!   This file is read as is by the programs requiring the translation.
!
! AUTHOR:
!   Jan de Maeyer
!
! CREATION DATE: 20-Aug-2010
!
! MODIFICATION HISTORY:
!
! NOTE: We cannot put SourceSafe history stuff in here (dollar Log ... dollar), because
! SourceSafe doesn't put the right comment character here.
! 
!
 .FACILITY dlgcm,15/prefix=dlgcm_
!
 .SEVERITY SUCCESS
 .BASE  1
!
!
! General terms and system strings used in various dialogs
!
!
! System strings used in various dialogs
!
add_button   "添加"
apply_button  "应用"
back_button   "封底"
browse_button  "浏览..."
cancel_button  "取消"
change_button  "更改..."
close_button  "关闭"
continue_button  "继续"
create_button  "创建"
default_button  "默认"
delete_button  "删除"
details_button  "详细"
duplicate_button "复制"
edit_button   "编辑..."
edit_plain_button "编辑"
help_button			"帮助"
info_button   "信息"
load_button   "加载"
next_button   "下一步"
measure_button  "测量..."
modify_button  "修改..."
more_button   "更多..."
new_button   "新建..."
ok_button			"正常"
new_in_menu_bar			"新建"
open_in_menu_bar		"打开"
print_button  "打印"
purge_button  "优化"
remove_button  "移除"
rename_button  "重命名..."
replace_button  "替换"
retry_button  "重试" 
save_button   "保存"
save_as_button  "另存为..."
select_button  "选择"
start_button  "开始"
store_button  "保存"
use_button   "使用"
!
! ICC rendering intents and general terms
!
rendering_intent "呈色意向"
ri_perceptual  "感知（图像）"
ri_relative   "相对色度"
ri_saturation  "饱和度"
ri_absolute   "绝对色度"
!
icc_sep_table  "分色表 (Tiff)"
icc     "ICC"
icc_rgb_profile  "RGB 配置文件"
icc_cmyk_profile "CMYK 配置文件"
!
!
! Time and measurement
!
hours    "小时"
minutes    "分钟"
seconds    "秒"
second    "秒" 
hours_cap   "小时"
hour_cap			"小时"
minutes_cap   "分钟"
minute_cap			"分钟"
seconds_cap   "秒"
days    "天"
centimeters   "厘米"
millimeters   "毫米"
cm_per_second  "厘米/秒"
mm_per_second  "毫米/秒"
percent    "%"
low     "低"
middle    "中"
high    "高"
maximum    "最大值"
none    "无"
off_cap    "关"
sec_abbr   "秒"
!
!
! Separation abbreviations used in various dialogs
!
cyan_separation		"C"
magenta_separation	"M"
yellow_separation	"Y"
key_separation		"K"
my_separation  "MY"
cy_separation  "CY"
cm_separation  "CM"
ck_separation  "CK"
mk_separation  "MK"
yk_separation  "YK"
myk_separation  "MYK"
cyk_separation  "CYK"
cmk_separation  "CMK"
cmy_separation  "CMY"
cmyk_separation  "CMYK"
orange_separation	"Or"  
green_separation	"Gr"
violet_separation "Vi" 
eight_separation "8th"
cor_separation  "COr"  
cgr_separation  "CGr"  
mor_separation  "MOr"  
mgr_separation  "MGr"  
yor_separation  "YOr"  
ygr_separation  "YGr"  
kor_separation  "KOr"  
kgr_separation  "KGr"  
orgr_separation  "OrGr"  
cmor_separation  "CMOr"  
cmgr_separation  "CMGr"  
cyor_separation  "CYOr"  
cygr_separation  "CYGr"  
ckor_separation  "CKOr"  
ckgr_separation  "CKGr"  
corgr_separation "COrGr"  
myor_separation  "MYOR"  
mygr_separation  "MYGr"  
mkor_separation  "MKOr"  
mkgr_separation  "MKGr"  
morgr_separation "MOrGr"  
ykor_separation  "YKOr"  
ykgr_separation  "YKGr"  
yorgr_separation "YOrGr"  
korgr_separation "KOrGr"  
cmyor_separation "CMYOr"  
cmygr_separation "CMYGr"  
cmkor_separation "CMKOr"  
cmkgr_separation "CMKGr"  
cmorgr_separation "CMOrGr"  
cykor_separation "CYKOr"  
cykgr_separation "CYKGr"  
cyorgr_separation "CYOrGr"  
ckorgr_separation "CKOrGr"  
mykor_separation "MYKOr"  
mykgr_separation "MYKGr"   
myorgr_separation "MYOrGr"    
mkorgr_separation "MKOrGr"  
ykorgr_separation "YKOrGr"  
cmykor_separation "CMYKOr"   
cmykgr_separation "CMYKGr"  
cmyorgr_separation "CMYOrGr"  
cmkorgr_separation "CMKOrGr"  
cykorgr_separation "CYKOrGr"  
mykorgr_separation "MYKOrGr"  
cmykorgr_separation "CMYKOrGr"
metallic_separation "Mt"
white_separation "Wh"
!
!
! Coordinates
!
X_coordinate  "X："
Y_coordinate  "Y："
!
! Color names used in various dialogs
!
cyan    "青色"
magenta    "洋红色"
yellow    "黄色"
key     "黑色"
black    "黑色"
proc_spot   "印刷色和专色" 
cmyk    "印刷色 (CMYK, CMYK+)"
rgb     "RGB"
bw     "BW"
gray    "灰度"
mono    "单色"
!
! General terms
!
resolution   "分辨率"
high_resolution  "高分辨率"
height    "高度"
width    "宽度"
orientation   "方向"
binary    "二进制"
ascii    "ASCII"
anti_aliasing  "抗锯齿"
aa_all_in_ct  "抗锯齿（全部以连续形式输出）"
out_color_space  "输出颜色空间"
!
!
! Wizard titles
!
setup_wiz_header "设置向导"
spoco_wiz_header "专色向导"
rfp_wiz_header  "参考打印机配置文件向导"
recal_wiz_header "重新校准向导"
acc_wiz_header "颜色匹配向导"
cal_wiz_header "校准向导"
out_wiz_wiz_header "输出 ICC 配置文件向导"
!
!
! ICC color correction settings
!
!
! Dialog ACC_CLOSED_LOOP 
!
title_acc_closed_loop  "校准"
closed_loop_meas   "测量"
closed_loop_criteria  "停止标准"
closed_loop_max_num   "最大迭代数量"
closed_loop_aver   "平均 dE 优于"
closed_loop_de    "最大 dE 优于"
closed_loop_exam   "检查测量"
closed_loop_finalize  "完成"
closed_loop_break   "中断"
closed_loop_close   "关闭"
closed_loop_discard   "放弃所有测量"
closed_loop_undo   "撤销"
closed_loop_start   "开始"
!
!
!
! Dialog ACC_CLOSED_LOOP_ACM 
!
title_acc_closed_loop_acm "颜色校正"
closed_loop_acm_filter  "应用过滤器"
closed_loop_acm_modify  "修改..."
closed_loop_acm_white  "纸白色设置"
!
!
!
! Dialog ACC_COPY
!
title_copy_acc_files "复制 ACC 文件"
copy_acc_intro   "还将复制相关的打印机校准。"
copy_acc_source_file "源文件"
copy_acc_source_folder "源基底文件夹"
copy_acc_dest_file  "目标文件"
copy_acc_dest_folder "目标基底文件夹"
!
!
!
! Dialog ACC_MAIN
!
title_acc_main   "颜色校正"
acc_main_white_lin  "修改白色线性化..."
acc_main_silver_lin  "修改金属色线性化..."
acc_main_meas   "测量"
acm_main_filter   "应用过滤器"
acc_main_modify   "修改..."
acc_main_print   "打印"
acc_main_white   "纸白色设置"
acc_main_lin   "更改线性化"
acc_main_exam   "检查测量"
acc_main_finalize  "完成"
acc_main_close   "关闭"
acc_main_discard  "放弃所有测量"
acc_main_skip   "跳过打印"
acc_main_load   "加载测量"
acc_main_measure  "测量测试图"
acc_main_calculate  "计算"
acc_main_undo   "撤销"
!
!
! Dialogs ACC_WIZ_ACT_EVAL
!    ACC_WIZ_ACM_EVAL
!
! All other text from dialog MF_ACC_WIZ_ACM_EVAL
! 
acc_wiz_acm_eval_his "颜色匹配历史记录"
acc_wiz_act_eval_his "颜色变换历史记录"
!
!
! Dialog ACC_OPT_APC 
!
title_acc_opt_apc   "打印机校准 - 选项"
acc_opt_calib    "按照参考打印机来校准打样打印机（建议）"
acc_opt_ref_profile   "参考打印机配置文件"
acc_opt_text_chart   "测试图"
acc_opt_mode    "闭环模式"
acc_opt_chart_ref   "测试图参考"
acc_opt_no_calib   "没有校准参考打印机（仅当没有 RFP 文件可用时选择）"
acc_opt_note    "校准文件只会包含线性化和油墨限制数据。"
acc_opt_settings   "打印设置"
acc_opt_change_lin_button "更改线性化..."
acc_opt_ink_limit   "油墨限制 (%)"
acc_opt_white_lin   "白色线性化..."
acc_opt_silver_lin   "金属色线性化..."
!
!
! Dialogs ACC_WIZ_INTRO 
!    RECAL_WIZ_INTRO
!
title_acc_wiz_intro    "重新校准向导"
acc_wiz_intro_welcome  "欢迎使用"
acc_wiz_intro_recal_wiz  "重新校准向导"
acc_wiz_intro_recal_hint "此向导将指引您完成重新校准 !{OEM_ORIS} 数字打样系统的流程。 其中将会执行以下步骤："
acc_wiz_intro_recal_list1 "- 线性化"
acc_wiz_intro_recal_list2 "- 打印机校准"
title_recal_wiz_intro    "重新校准向导"
recal_wiz_intro_welcome  "欢迎使用"
recal_wiz_intro_recal_wiz  "重新校准向导"
recal_wiz_intro_recal_hint	"此向导将指引您完成重新校准 !{OEM_ORIS} 数字打样系统的流程。 其中将会执行以下步骤："
recal_wiz_intro_recal_list1 "- 线性化"
recal_wiz_intro_recal_list2 "- 打印机校准"
!
!
! Dialogs ACC_WIZ_ACM_MEAS
!    ACC_WIZ_ACT_MEAS
!    ACC_WIZ_ACT_TRANS
!    ACC_WIZ_APC_MEAS
!    RECAL_WIZ_MEAS
!
title_ACC_WIZ_MEAS  "测试图测量"
recal_wiz_acm_meas_info "您想要如何使用校准测试图？"
acc_wiz_acm_meas_info "您想要如何使用颜色匹配测试图？"
acc_wiz_meas_load  "我已经测量了测试图并想要加载一份测量文件"
acc_wiz_meas_meas  "我想要测量测试图"
acc_wiz_act_meas_info "您想要如何使用颜色变换测试图？"
acc_wiz_apc_meas_info "您想要如何使用校准测试图？"
acc_wiz_meas_info  "您想要如何使用线性化测试图？" 
title_acc_wiz_trans  "变换"
acc_wiz_act_trans_info "颜色变换已应用至以下测试图："
!
!
! Dialogs ACC_WIZ_APC_EVAL
!    RECAL_WIZ_EVAL
!
! All other text from dialog MF_ACC_WIZ_ACM_EVAL
! 
title_acc_wiz_eval  "评估"
acc_wiz_apc_eval_his "校准历史记录"
acc_wiz_eval_ok   "我对结果感到满意"
acc_wiz_eval_not_ok  "我想要通过进一步的测量以改善结果"
acc_wiz_eval_viewer  "色域查看器"
acc_wiz_eval_discard "放弃所有测量"
acc_wiz_eval_pw   "纸白色设置"
!
!
! Dialogs ACC_WIZ_ACM_PRI
!    ACC_WIZ_APC_PRI
!    RECAL_WIZ_PRI
! 
title_ACC_WIZ_PRI   "打印测试图"
acc_wiz_acm_pri_info  "单击“下一步”以打印颜色匹配测试图。"
acc_wiz_apc_pri_info  "单击“下一步”以打印校准测试图。"
acc_wiz_acm_pri_filter  "应用过滤器"
acc_wiz_acm_pri_copies  "副本"
acc_wiz_apc_pri_lin   "更改线性化"
acc_wiz_apc_pri_white_lin "更改白色线性化"
acc_wiz_apc_pri_silver_lin "更改金属色线性化"
!
!
! Dialogs ACC_WIZ_CLOSED_LOOP_APC_MEAS
!       ACC_WIZ_CLOSED_LOOP_ACM_MEAS
!       RECAL_WIZ_CLOSED_LOOP
!       RECAL_WIZ_CLOSED_LOOP_MEAS
!
title_ACC_WIZ_CL_ACM_MEAS "颜色匹配 - 闭环模式"
title_ACC_WIZ_CL_APC_MEAS "校准 - 闭环模式"
acc_wiz_cl_meas    "测量"
!
!
! Dialogs ACC_WIZ_CLOSED_LOOP_ACM
!       ACC_WIZ_CLOSED_LOOP_APC
!
title_ACC_WIZ_CL_ACM "颜色匹配 - 停止标准"
title_ACC_WIZ_CL_APC "校准 - 停止标准"
acc_wiz_cl_max_iter  "最大迭代数量"
acc_wiz_cl_aver   "平均 dE 优于"
acc_wiz_cl_max   "最大 dE 优于"
acc_wiz_cl_filter  "应用过滤器"
acc_wiz_cl_pw   "纸白色设置"
!
!
! Dialogs ACC_WIZ_COMPL
!    RECAL_WIZ_COMPL
!
acc_wiz_compl_grat  "恭喜！"
acc_wiz_complete  "您的打印机现已完成重新校准。"
!
!
! Dialog ACC_WIZ_GAMUT_VIEWER 
!
acc_wiz_printer_gamut "打印机色域"
acc_wiz_target_gamut "目标色域"
acc_wiz_transp_gamut "透明 打印机色域"
!
!
! Dialog ACC_WIZ_SAVE_ICC 
!
save_icc_title  "ICC 输出配置文件导出"
save_icc_opt  "我想要将新的 ICC 输出配置文件导出至："
!
!
! Dialog ACC_WIZ_WG_COMPL
!
acc_wiz_wg_complete "您的宽色域队列现已完成颜色校正。"
!
!
! Dialogs LIN_WIZ_INTRO     
!
lin_wiz_intro_title   "线性化向导" 
lin_wiz_intro_welcome  "欢迎使用"
lin_wiz_intro_name   "线性化向导"
lin_wiz_intro_txt   "此向导将指引您完成线性化打样系统的流程。"
!
!
! Dialog CLEAN_HEAD 
!
title_clean_head  "打印头清洁"
clean_head_printer  "打印机"
clean_head_model  "型号"
clean_head_header  "打印头清洁"
clean_head_min_idle  "最少经过此空闲时间后"
clean_head_days   "天"
clean_head_last_time "上一次清洁时间"
clean_head_last_print "上一次打印输出"
clean_head_after  "在"
clean_head_num_print "次打印输出后清洁"
clean_head_before  "打印文件前清洁"
clean_head_normal  "正常清洁"
clean_head_power  "强力清洁" 
clean_head_special  "特殊清洁" 
clean_head_auto   "自动清洁"
clean_head_nozzle  "清洁前/后打印喷嘴测试图案"
clean_head_now   "立即进行打印头清洁"
!
!
! Dialog CLOSED_LOOP_LIN 
!
title_closed_loop_lin "线性化"
!
!
! Dialogs CMONITOR_SETTINGS_MEASDEV, CP_SETTINGS_MEASDEV
! 
!
title_cmon_set_measdev  "测量设备设置"
cmon_set_measdev_hdr_dev "测量设备"
cmon_set_measdev_instr  "设备"
cmon_set_measdev_instr_name "设备名称"
cmon_set_measdev_response "响应状态"
cmon_set_measdev_serial  "序列号"
cmon_set_measdev_filter  "过滤器"
cmon_set_measdev_dev_type "设备类型"
cmon_set_measdev_illu  "光源"
cmon_set_measdev_observer "标准观测器"
cmon_set_measdev_signal  "设备发出信号"
cmon_set_measdev_sensor  "内置传感器"
cmon_set_measdev_correlate "关联"
cmon_set_measdev_self_calib "自我校准"
cmon_set_measdev_schedule "时间表"
cmon_set_measdev_test  "测试"
!
title_cp_settings_measdev "测量设备设置"
cp_set_measdev_setup  "测量设备设置"
cmon_set_measdev_port  "端口" 
cmon_set_measdev_baud  "数据速率（波特）"
cmon_set_measdev_solid  "额外测量固体密度"
cmon_set_measdev_rela  "相对于纸张"
cmon_set_measdev_xgra  "使用 XRGA 标准"
cmon_set_measdev_strips  "测量色带"
cmon_set_measdev_patches "测量单一色标"
cmon_set_measdev_pos  "正极板"
cmon_set_measdev_neg  "负极板"
cp_header_prop    "设备属性"
cp_set_measdev_meas_mode "测量方法"
cp_set_measdev_patch_size "色标大小 (mm)"
cp_set_measdev_gap_size  "间隙大小 (mm)"
!
!
! Dialogs COLOR_ATLAS, COLOR_ATLAS_TAB
!
title_color_atlas  "视觉上定义专色"
col_atl_hint1   "选择颜色混合"
col_atl_hint2   "打印样本"
col_atl_hint3   "视觉上与示例比较"
col_atl_hint8   "单击最佳匹配样本"
col_atl_base   "基色"
col_atl_addit   "其他颜色"
col_atl_use_silv  "金属银色"
col_atl_col_steps  "色频"
title_color_atlas_tab "样本"
!
!
! Dialog COST_LOG 
!
title_cost_log  "消耗日志"
cost_log_queue  "队列"
cost_log_all_queues "将设置应用至所有队列"
cost_log_create  "创建打印消耗信息"
cost_log_lf   "日志文件"
cost_log_info  "信息"
!
!
!  Dialogs CT6_ACC_WIZ_PROP_SHEET 
!   CT6_RECAL_WIZ_PROP_SHEET 
!   CT6_RFP_WIZ_PROP_SHEET
!   CT6_SETUP_WIZ_PROP_SHEET
!                       CT6_SPOCO_WIZ_PROP_SHEET
!
! (No particular text)
!
! Dialog CVC 
!
title_cvc    "选择性颜色值校正"
cvc_header_cur_sel  "当前选择"
cvc_cc_table   "CC 表"
cvc_print_profile  "目标配置文件"
cvc_proof_profile  "设备配置文件"
cvc_ri     "呈色意向"
cvc_color_steps   "色频(# grid points)"
cvc_print    "输入"
cvc_c					"C"
cvc_m					"M"
cvc_y					"Y"
cvc_k					"K"
cvc_fixed    "固定频率"
cvc_check    "灰度"
cvc_header_ar   "活动范围"
cvc_cmyk    "CMYK"
cvc_header_print_proof "输入            输出"
cvc_header_cie   "CIE"
cvc_header_print  "输入"
cvc_header_proof  "输出"
cvc_header_delta  "delta"
cvc_header_estimated "估计"
cvc_l     "L"
cvc_a     "a"
cvc_b     "b"
cvc_dcab    "dCab/dHab"
cvc_graph_button  "图形"
cvc_de     "dE"
cvc_de94    "dE94"
cvc_proof    "输出"
cvc_mini_de    "最小化 dE"
cvc_corr    "校正"
cvc_header_col_values "颜色值 / 测量"
cvc_3d_button   "3D 视图"
cvc_stat_button   "统计数据"
cvc_add_button   "添加条目"
cvc_reset_button  "重设示例"
cvc_slb_button   "SLB"
cvc_eval_button   "评估"
cvc_diff_button   "CC 差异"
cvc_view_3d_button  "CC 3D 视图"
cvc_view_2d_button  "CC 2D 视图"
cvc_1_to_1_button  "1 : 1"
cvc_min_de_button  "最小化 dE"
cvc_smooth_button  "平滑"
cvc_black_versioning "避免重影"
cvc_apply    "应用"
cvc_undo_button   "撤销"
cvc_dat_button   "!{OEM_ORIS__DAT}"
!
acc_opt_purge_channels "清除一次色"
cvc_tac     "油墨总覆盖率"
cvc_tac_abbr   "油墨总覆盖率" 
!
! 
! Dialog CVC_ADD_SAMPLE 
!
title_cvc_add_sample "添加值"
cvc_add_percent   "添加值的百分比为"
cvc_add_show_again  "在下一次添加值时显示此对话框"
!
!
! Dialog CVC_CC_3D 
!
title_cvc_cc_3d   "3D 视图"
cvc_3d_axes    "轴"
cvc_3d_xy    "X/Y"
cvc_3d_view    "视图"
cvc_3d_ar    "仅限活动范围"
cvc_3d_pts    "点"
cvc_3d_edges   "边"
cvc_3d_areas   "区域"
!
!
! Dialog CVC_DIFF_3D 
!
title_cvc_diff_3d  "3D 视图"
!
!
! Dialog CVC_LAB_MAP 
!
title_cvc_col_diff  "色差"
cvc_lab_dadb   "da  db"
cvc_lab_dl    "dL"
cvc_lab_dcab   "dCab"
cvc_lab_dhab   "dHab"
!
!
! Dialog CVC_MEAS_3D
!
title_cvc_meas_3d  "3D 视图"
cvc_meas_3d_view  "视图"
cvc_meas_3d_ar   "仅限活动范围"
cvc_meas_3d_weight  "显示加权"
cvc_meas_3d_proof  "打样"
cvc_meas_3d_prf_pts  "打样点"
cvc_meas_3d_prf_edges "打样边"
cvc_meas_3d_prf_areas "打样区域"
cvc_meas_3d_prf_transp "打样透明"
cvc_meas_3d_print  "打印"
cvc_meas_3d_prt_edges "打印边"
cvc_meas_3d_prt_areas "打印区域"
cvc_meas_3d_prt_err  "误差向量"
!
!
! Dialog CVC_OPT 
!
title_cvc_opt  "颜色值校正优化"
apply_to   "应用至"
optimize_color  "优化"
!
!
! Dialog CVC_QUERY_SAMPLE_TYPE 
!
title_cvc_query    "示例类型"
cvc_query_sample   "颜色示例"
cvc_query_ref_file   "参考文件"
cvc_query_ref_rows   "行数"
cvc_query_ref_columns  "列数"
!
!
! Dialog CVC_VIEW 
!
title_cvc_view    "CVC 视图"
cv_header     "颜色轴"
cv_cyan						"C"
cv_magenta					"M"
cv_yellow					"Y"
cv_key						"K"
!
!
! Dialog CXF_SEL_SET_DM 
!
title_cxf_select   "选择一个示例集"
cfx_file_info    "文件信息"
!
!
! Dialog DAT_EDIT_SELECT
!
title_dat_edit_select  "编辑颜色校正表"
dat_edit_continue   "我想要继续进行颜色匹配"
dat_edit_finish    "我想要完成颜色匹配并进行手动校正"
!
!
! Dialog DAT_MAKE_DEFAULT_FROM_ICC 
!
title_dat_make_def   "根据 ICC 配置文件创建颜色表"
dat_header_pri_proof  "打印机 / 打样机"
dat_make_def_pri   "打印机"
dat_make_def_paper   "纸张"
dat_make_def_pri_qual  "打印质量"
dat_make_def_profile  "打样配置文件"
dat_header_col_space  "目标打印颜色空间"
dat_make_def_targ_spc  "目标颜色空间"
dat_make_pri_profile  "打印配置文件"
dat_header_rgb_col_space "RGB 输入颜色空间"
dat_make_rgb_profile  "RGB 配置文件"
dat_make_col_table   "颜色表名称"
dat_make_create_button  "创建"
!
!
! DAT_SELECT_DEFAULT 
!
title_dat_sel_def    "颜色表选择"
dat_sel_def_target    "目标颜色空间"
dat_sel_def_printer    "打印机"
dat_sel_def_paper    "纸张"
dat_sel_def_print_qual   "打印质量"
dat_sel_def_col_table   "颜色表"
dat_sel_def_col_status   "状态"
dat_sel_def_set_def_button  "设置默认颜色表"
dat_sel_def_set_other_button "其他颜色表..."
dat_sel_def_make_def   "创建默认颜色表"
!
!
! Dialogs DAT_VIEWER and MF_DAT_VIEWER 
!
title_dat_viewer   "!{OEM_ORIS_DAT} 查看器"
dat_viewer_dat    "!{OEM_ORIS_DAT}"
dat_viewer_demo    "用演示版创建"
dat_viewer_file_info  "文件信息"
dat_viewer_modified   "最后修改日期"
dat_viewer_checksum   "校验和"
dat_viewer_cmyk_colcorr  "CMYK 颜色校正参数"
dat_viewer_no_colcorr  "无 CMYK 颜色校正"
dat_viewer_num_grid   "网格点数"
dat_viewer_cmyk_default  "标准 CMYK 颜色校正"
dat_viewer_global   "输入渐变"
dat_viewer_colcorr   "颜色校正"
dat_viewer_prt_profile  "目标配置文件"
dat_viewer_prf_profile  "设备配置文件"
dat_viewer_corr_val   "栏 值校正"
dat_viewer_col_match  "颜色匹配"
dat_viewer_is    "Ink Saver 省墨软件"
dat_viewer_pm    "Press Matcher 颜色匹配软件"
dat_viewer_prf_grad   "输出渐变"
dat_viewer_devlnk   "ICC 设备链接配置文件颜色校正"
dat_viewer_devlnk_profile "设备链接配置文件"
dat_viewer_default   "标准"
dat_viewer_cmyk    "CMYK 是打印颜色空间"
dat_viewer_print   "打印"
dat_viewer_save_as   "另存为文本文件..."
!
dat_viewer_black_sep  "黑色分色设置"
dat_viewer_keep_black  "保持纯黑"
dat_viewer_sep_method  "分色方法"
dat_viewer_start_pnt  "起始点"
dat_viewer_cmy_red   "CMY 减少"
!
!
! Dialog DDSCC 
!
title_ddscc   "颜色表"
header_cmyk_colcorr "CMYK 颜色校正"
no_cmyk_colcorr  "无 CMYK 颜色校正"
def_cmyk_colcorr "标准 CMYK 颜色校正"
global_colcorr  "输入渐变"
proofer_grad  "输出渐变"
colcorr    "颜色校正"
icc_devlink_colcorr "ICC 设备链接配置文件颜色校正"
devlink_profile  "设备链接配置文件"
header_rgb_cmyk_sep "RGB-CMYK 分色"
create_dat_button "创建 !{OEM_ORIS_DAT}..."

!
!
! DIALOG DEMO_INFO
!
title_demo_info    "演示版信息"
!
!
! Dialog DENS_GET_GEOMETRY 
!
title_dens_get_geo   "图表几何"
get_geo_patch_size   "色标大小 (mm)"
get_geo_gap_size   "间隙大小 (mm)"
get_geo_black_patch   "色带开头和末尾的黑色色标"
!
!
! Dialog DENS_GET_MEASUREMENTS 
!
title_dens_get_meas   "密度"
dens_get_meas_next_button "确定，下一步"
!
!
! Dialogs DENS_GRD and NCLR_GRD_DETAILS 
!
title_dens_grd    "根据密度进行线性化"
dens_grd_meas_dev   "测量设备"
dens_grd_dev    "设备"
dens_grd_sel    "选择"
dens_grd_pri_lin_chart  "打印线性化测试图..."
dens_grd_targ_dens   "目标密度"
dens_grd_max_dens   "最大 密度"
dens_grd_from_meas   "取自测量"
dens_grd_user_def   "用户定义"
dens_grd_max    "最大值"
dens_grd_lin_method   "线性化方法..."
dens_grd_options   "选项"
dens_grd_optimize   "优化活动渐变"
dens_grd_set_max   "将最大颜色密度设为 100%"
dens_grd_smooth    "平滑"
dens_grd_dens_values  "密度值"
dens_grd_col_perc   "颜色 %"
dens_grd_target_c   "目标 C"
dens_grd_meas_c				"测量 C"
dens_grd_target_m   "目标 M"
dens_grd_meas_m				"测量 M"
dens_grd_target_y   "目标 Y"
dens_grd_meas_y				"测量 Y" 
dens_grd_target_k   "目标 K"
dens_grd_meas_k				"测量 K"
dens_grd_target_or   "目标 Or"
dens_grd_meas_or			"测量 Or"
dens_grd_target_gr   "目标 Gr"
dens_grd_meas_gr			"测量 Gr" 
dens_grd_add_button   "添加"
dens_grd_del_button   "移除"
dens_grd_meas_button  "测量已打印的色标..."
!
nclr_grd_details_target_c "C 目标"
nclr_grd_details_meas_c  "C 测量"
nclr_grd_details_target_m "M 目标"
nclr_grd_details_meas_m  "M 测量"
nclr_grd_details_target_y "Y 目标"
nclr_grd_details_meas_y  "Y 测量"
nclr_grd_details_target_k "K 目标"
nclr_grd_details_meas_k  "K 测量"
nclr_grd_details_target_or "Or 目标"
nclr_grd_details_meas_or "Or 测量"
nclr_grd_details_target_gr "Gr 目标"
nclr_grd_details_meas_gr "Gr 测量"
nclr_grd_details_target_vi "Vi 目标" 
nclr_grd_details_meas_vi "Vi 测量" 
nclr_grd_details_target_8 "8th 目标"  
nclr_grd_details_meas_8  "8th 测量"
 nclr_grd_details_max_c  "C 最大"
nclr_grd_details_max_m  "M 最大"
nclr_grd_details_max_y  "Y 最大"
nclr_grd_details_max_k  "K 最大"
nclr_grd_details_max_or  "Or 最大"
nclr_grd_details_max_gr  "Gr 最大"
nclr_grd_details_max_vi  "Vi 最大" 
nclr_grd_details_max_8  "8th 最大"
nclr_grd_details_reset  "从测量获得最大密度" 
nclr_grd_details_grad  "渐变"
dens_grd_color    "颜色"
!
!
! Dialog ESKO_SEL_SET
!
title_esko_sel_set "油墨书选择"
esko_sel_set_type "油墨书类型"
esko_sel_set_all "全部"
esko_sel_set_esko "Esko"
esko_sel_set_smart "PANTONE Live"
!
!
! Dialogs ESPSP_TOOLS and CANONOIPF_TOOLS 
!
title_espsp_tools    "Epson 光谱打样工具"
esp_tool_chart_ref    "测试图参考"
esp_tool_used     "用于"
esp_tool_add_chart    "其他图表"
esp_tool_job     "作业"
esp_tool_add_colbar    "颜色条"
esp_tool_printer    "打印机"
esp_tool_chart_image   "测试图/图像"
esp_tool_col_bar    "颜色条"
esp_tool_settings_button  "设置..."
esp_tool_chart_layout_hdr  "测试图布局"
esp_tool_layout     "图表布局"
esp_tool_keep_layout   "保持参考布局"
esp_tool_keep_warmup   "预热框架"  
esp_tool_keep_gaps    "线间隙" 
esp_tool_keep_rows    "多行"
esp_tool_meas_format   "手动测量格式"
esp_tool_device_type   "设备类型"
esp_tools_patch_width   "色标宽度 (7.0 ... 20.0mm)"
esp_tools_patch_height   "色标高度 (7.0 ... 20.0mm)"
esp_tool_create_tiff   "创建 Tiff 测试图"
esp_tool_file_name    "Tiff 文件名"
esp_tool_net_size    "图表净大小"
esp_tool_create_button   "创建..."
esp_tool_print_meas_hdr   "打印和测量图表"
esp_tool_cie_lab    "CIE Lab" 
esp_tool_cie_xyz    "CIE XYZ"
esp_tool_cie_yxy    "CIE Yxy" 
esp_tool_cie_lch    "CIE Lch"
esp_tool_spec_data    "光谱数据"
esp_tool_dens     "密度"
esp_tool_dry_time    "干燥时间（单位：秒）"
esp_tool_xrga     "使用 XRGA 标准"
esp_tool_uvcut     "UV-cut 过滤器"
esp_tool_dir_meas_files   "测量文件的目录"
esp_tool_print_meas_button  "打印和测量"
esp_tool_colbar     "颜色条"
esp_tool_warmup     "预热框架"
esp_tool_gaps     "线间隙"
esp_tool_rows     "多行"
!
title_canon_ipf_tools  "Canon iPF 分光光度计工具"
canonipf_pos_bar   "定位条"
canonipf_keep_height  "保持页面高度"
canonipf_patch    "色标大小"
canonipf_small    "小"
canonipf_standard   "标准"
canonipf_big    "大"
canonipf_margins   "边距（单位：毫米）"
canonipf_left    "左"
canonipf_right    "右"
canonipf_top    "顶部"
canonipf_bottom    "底部"
canonipf_values    "值"
canonipf_drying    "干燥时间（单位：秒）"
canonipf_uvcut    "UV-cut 过滤器"
canonipf_calib    "校准"
canonipf_get_info   "获取信息 ..."
canonipf_check    "检查颜色..."
canonipf_hist    "历史记录"
canonipf_assist    "颜色检查辅助..."
canonipf_cal_link   "校准链接..."
canonipf_update    "更新纸张列表..."
!
!
! Dialog CANON_PRINTMODES_UPDATE
!
title_canon_printmodes_update "Canon - 加载自定义介质" 
canon_calib_printer    "打印机"
canon_upd_hf_type    "打印方法"
canon_upd_col_mode    "颜色模式"
canon_upd_path     "介质列表文件路径"
canon_upd_get     "加载自定义介质"
canon_upd_upd     "导入介质信息文件"
canon_upd_reload    "重新加载介质列表"
canon_upd_save     "保存介质列表"
!
!
! Dialog CANON_GET_INFO
!
title_canon_get_info   "Canon 获取设备信息"
canon_calib_acquire    "获取"
!
!
! Dialog CANON_GET_CUSTOM_MEDIA
!
title_canon_get_custom_media "Canon - 加载自定义介质"
canon_get_custom_sel_all  "全选"
!
!
! Dialog CANON_COLOR_CHECK_ASSIST
!
title_canon_col_check_assist "Canon 颜色检查辅助"
canon_color_check_ref_data  "参考数据" 
canon_color_check_multi   "多传感器"
canon_color_check_meas   "测量"
canon_color_check_calib   "校准"
canon_color_check_colcheck  "颜色检查" 
canon_color_check_spectral  "分光测光仪"
canon_color_check_norm_cal  "正常校准"
canon_color_check_norm_check "正常颜色检查" 
canon_color_check_safe_calib "安全校准"
canon_color_check_safe_check "安全颜色检查"
!
!
! Dialog CANON_COLOR_CHECK
!
title_canon_col_check   "Canon 颜色检查"
canon_calib_big_patch   "打印大色标"
canon_col_check_start   "开始颜色检查" 
!
!
! Dialog CANON_CALIBRATION_LINK
!
title_canon_calib_link   "Canon 校准链接" 
canon_calib_link_MIT   "Canon MIT 库版本"
canon_calib_link_list   "介质列表"
canon_calib_link_show   "显示介质"
canon_calib_link_upd   "更新介质信息..."
!
!
! Dialog CANON_CALIBRATION_HISTORY
!
title_canon_calib_hist   "Canon 校准历史记录"
!
!
! Dialog CANON_CALIBRATION
!
title_canon_calib    "Canon 校准"
canon_calib_start    "开始校准"
!
!
! Dialog  EVALCC
!
title_evalcc     "评估颜色匹配"
evalcc_aver_de     "平均 dE"
evalcc_std_de     "标准 偏差 dE"
evalcc_aver_rough    "平均 粗糙度"
evalcc_std_rough    "标准 偏差 粗糙度"
evalcc_worst_de     "最差 dE"
evalcc_worst_rough    "最差粗糙度"
!
!
! Dialog EXPORT_QUEUE 
!
title_exp_queue     "导出队列"
exp_queue_existing    "现有队列"
exp_queue_hint     "按<Ctrl> +鼠标左键，选择多个队列。 按 <Ctrl> + <A>， 选择所有队列"
exp_queue_exp_file_name   "导出 \n文件或路径名称"
exp_queue_export_button   "导出"
!
!
! GAMUT_DEF
! consisting of dialogs
! GAMUT_DEF_CC
! GAMUT_DEF_ICC 
! GAMUT_DEF_MEAS 
! GAMUT_DEF_SCG 
! GAMUT_DEF_SCG_SIMULATION 
! 
title_gamut_def     "色域定义"
gamut_def_name     "名称"
gamut_def_col_corr    "颜色校正"
gamut_calib      "校准"
gamut_def_profile    "配置文件"
gamut_def_meas     "测量"
gamut_def_scg     "专色校正"
!
!
! Dialog GAMUT_SELECTION 
!
title_gamut_sel     "色域显示选择"
gamut_sel_meas     "测量的色域"
gamut_sel_icc     "ICC 配置文件的色域"
gamut_sel_printer    "经过颜色校正的打印机的色域"
gamut_sel_spot_target   "专色校正的目标值"
gamut_sel_spot_sim    "专色校正的模拟"
!
!
! Dialog GAMUT_VIEWER 
!
title_gamut_viewer    "色域查看器"
gamut_vwr_Filter    "过滤器"
gamut_vwr_range_center   "范围中心"
gamut_vwr_range     "范围"
gamut_vwr_all     "全部"
gamut_vwr_chroma    "色度圆柱体"
gamut_vwr_gamut     "色域"
gamut_vwr_color     "颜色"
gamut_vwr_transparency   "透明"
gamut_vwr_areas     "区域"
gamut_vwr_edges     "边"
gamut_vwr_points    "点"
gamut_vwr_target    "目标色域 ="
gamut_vwr_actual    "实际色域 ="
!
!
! Dialog GCR_MATCH 
!
title_cgr_match   "Ink Saver 省墨软件标准"
gcr_icc_profile   "ICC 配置文件"
gcr_meas    "测量"
ink_saver_separation "Ink Saver 省墨软件"
total_ink_coverage  "油墨总覆盖率"
starting_point   "起始点"
keep_k_below_start_k "将 K 保持在起始点以下"
cmy_reduction   "CMY 减少"
header_cmyk_sep_params "RGB-CMYK 分色"
!
!
! Dialog GET_PR_DISPLAY_NAME 
!
title_get_display_name   "更改队列名称"
get_display_name    "请输入新的名称，队列将会以该名称显示："
!
!
! Dialog GFX_CUSTOMIZECOL 
!
title_customizecol  "自定义列"
free_columns   "可用的列"
shown_columns   "已显示的列和顺序"
add_gt_button   "添加 ->"
lt_remove_button  "<- 移除"
moveup_button   "上移"
movedown_button   "下移"
!
! Dialog GFX_FORMATCOL 
!
title_gfx_formatcol  "列格式"
free_fields    "可用的字段"
format     "格式"
label     "标签"
label_2     "标签 2"
characters    "字符"
alignment    "对齐"
radio_left    "左"
radio_center   "居中"
radio_right    "右"
!
!
! Dialogs GRD_DOTGAIN and GRD_SPOCO 
! 
title_grd_dotgain  "整体专色网点增益"
grd_dotgain_dg   "网点增益"
grd_spoco_target  "目标"
grd_spoco_actual  "实际"
grd_spoco_dE   "dE"
grd_dotgain_x   "X："
grd_dotgain_y   "Y："
grd_dotgain_add   "添加网点"
grd_dotgain_rem   "移除网点"
grd_dotgain_undo  "撤销"
grd_dotgain_undo_pnt "撤销网点"
!
title_grd_spoco   "专色渐变"
grd_spoco_color   "颜色"
!
!
! Dialog GRD_INKLIN
!
title_GRD_INKLIN "油墨线性化"
grd_inklin_grad  "渐变"
inklin_linear  "线性"
inklin_custom  "自定义"
!
!
! Dialog GRD_NEW
!
title_grd_new  "颜色渐变"
header_gradation "渐变"
grad_file_name  "文件名"
grad_max   "最大值"
grad_100   "100.0"
grad_x_axis   "X："
grad_y_axis   "Y："
grad_y_max   "最大 Y："
header_grad_color "颜色"
grad_c				"C"
grad_m				"M"
grad_y				"Y"
grad_k				"K"
grad_ymc   "YMC"
header_grad_step "频率"
grad_add_point_button  "添加网点"
grad_undo_point_button  "撤销网点"
grad_remove_point_button "移除网点"
grad_one_to_one_button  "1:1"
grad_measurements_button "测量..."
grad_all_one_to_one_button "全部 1:1"
grad_undo_button   "撤销"
grad_apply_button   "应用"
!
!
! Dialog HPDJZ_TOOLS 
!
title_hp_tool     "HP Designjet Z 系列工具"
hp_tool_ref      "测试图参考"
hp_tool_for      "用于"
hp_tool_add_chart    "其他图表"
hp_tool_job      "作业"
hp_tool_col_bar     "颜色条"
hp_tool_printer     "打印机"
hp_tool_set      "设置..."
hp_tool_chart_layout   "测试图布局"
hp_tool_shape     "色标形状"
hp_tool_rect     "矩形"
hp_tool_hex      "六边形"
hp_tool_layout     "图表布局"
hp_tool_def      "默认"
hp_tool_opt      "最佳"
hp_tool_keep_ref    "保持参考布局"
hp_tool_contrast    "对比线"
hp_tool_warmup     "预热区域"
hp_tool_align     "对齐标记"
hp_tool_create_tiff    "创建 Tiff 测试图"
hp_tool_file_name    "Tiff 文件名"
hp_tool_print_chart    "打印和测量图表"
hp_tool_values     "值"
hp_tool_lab      "CIE Lab"
hp_tool_xyz      "CIE XYZ"
hp_tool_spectral    "光谱数据"
hp_tool_dens     "密度"
hp_tool_all      "全部"
hp_tool_dry      "干燥时间（单位：秒）"
hp_tool_dir      "测量文件的\n目录"
hp_tool_print     "打印和测量"
!
!
! Dialog HTML_POPUP 
! (No text)
!
!
! Dialog ICC 
!
title_icc     "CC 表"
header_icc_profile_settings "配置文件设置"
icc_print     "目标"
icc_proof     "设备"
icc_save_cc_button   "保存 CC..."
icc_create_dat_button  "创建 !{OEM_ORIS_DAT}..."
icc_close_button   "关闭"
!
!
! Dialog ICC_EXT
!
title_icc_ext  "CC 表"
icc_ext_prof_set "配置文件设置"
icc_ext_print  "打印"
icc_ext_proof  "打样"
icc_ext_col_modes "颜色模式"
icc_ext_clean  "清除一次色"
icc_ext_black_mode "黑色模式"
icc_ext_sep   "分色"
icc_ext_mode  "模式"
icc_ext_key   "黑色"
icc_ext_start  "开始"
icc_ext_max   "最大"
icc_ext_width  "宽度"
icc_ext_total_ink "油墨总覆盖率"
icc_ext_save  "保存 CC..."
icc_ext_create  "创建 !{OEM_ORIS_DAT}..."
!
!
! ICC_DEVLINK_ENC 
!
title_icc_devlink   "根据 ORIS DAT 创建 ICC 设备链接配置文件"
icc_devlink_dat_file  "!{OEM_ORIS__DAT} 文件"
icc_devlink_dongle_id  "用于解码 ICC 设备链接配置文件的加密狗 ID"
icc_devlink_file_name  "新 ICC 设备链接配置文件的文件名"
icc_devlink_create   "创建配置文件"
!
!
! Dialog ICC_DEVLINK_EXP_OPT 
!
title_devlink_opt   "ICC 设备链接配置文件选项"
devlink_opt_8bit   "8 位表"
devlink_opt_clut   "CLut 点"
devlink_opt_16bit   "16 位表"
devlink_opt_in_lut   "InputLut 条目"
devlink_opt_out_lut   "OutputLut 条目"
!
!
! Dialog ICC_DEVLINK_FROM_DAT 
!
title_devlink_dat    "根据 !{OEM_ORIS__DAT} 创建 ICC 设备链接配置文件"
devlink_dat_file    "!{OEM_ORIS__DAT} 文件"
devlink_dat_create_cmyk_link "创建 CMYK 至 CMYK 设备链接"
devlink_dat_create_rgb_link  "创建 RGB 至 CMYK 设备链接（文件名中带有 __rgb）"
devlink_dat_create_output  "创建 ICC 输出文件（文件名中带有 __output）"
devlink_dat_new_icc_name  "新配置文件的文件名称"
devlink_cc_create_prof  "创建配置文件"
!
!
! Dialog ICC_DEVLINK_FROM_DAT_COUNT
!
devlink_dat_remaining  "剩余的 ORIS 链接配置文件"
devlink_dat_allowed   "仍允许生成的 ORIS 链接配置文件数量"
devlink_dat_increment  "如果您要增加数量，请联系您当地的经销商。"
!
!
! Dialog ICC_DEVLINK_TO_CC 
!
title_devlink_get  "从 ICC 设备链接配置文件获取颜色校正"
devlink_get_profile  "设备链接配置文件"
devlink_get_extract  "提取并转换配置文件数据以"
devlink_get_global  "输入渐变"
devlink_get_col_corr "颜色校正"
devlink_get_icc_in  "ICC 输入配置文件"
devlink_get_icc_out  "ICC 输出特性文件"
devlink_get_proof_grad "输出渐变"
devlink_get_convert  "转换"
!
!
! Dialog ICC_GAMUT_COMPARE 
!
title_devlink_gamut  "ICC 配置文件色域比较"
devlink_gamut_target "目标配置文件"
devlink_gamut_test  "测试配置文件"
devlink_gamut_de  "最大 dE"
devlink_gamut_abs_ri "绝对 RI"
devlink_gamut_rel_ri "相对 RI"
devlink_gamut_perc_ri "感知 RI"
devlink_gamut_percent "色域（%）"
devlink_gamut_max_de "最大 dE"
!
! ICC_PROFILE_DUMP 
!
title_icc_profile_dump "ICC 配置文件查看器"
icc_pd_profile   "配置文件"
header_icc_pd_header "标题（字节 0 ... 127）"
icc_pd_prof_size  "配置文件大小"
icc_pd_vers_num  "配置文件版本号"
icc_pd_cmm_type  "CMM 类型"
icc_pd_dev_class "配置文件/设备分级"
icc_pd_col_space "数据颜色空间"
icc_pd_conn_space "配置文件连接空间"
icc_pd_crea_date "创建日期"
icc_pd_signature "签名"
icc_pd_prim_platf "主要平台"
icc_pd_flags  "标志"
icc_pd_dev_manuf "设备制造商"
icc_pd_dev_model "设备型号"
icc_pd_dev_attr  "设备属性"
icc_pd_illum  "光源"
icc_pd_creator  "创建者"
icc_pd_ink_cov  "油墨总覆盖率"
header_icc_pd_tags "标签表（字节 128 ...）"
icc_pd_tag_num  "标签数量"
icc_pd_extract_meas "提取测量文件..."
save_table_as  "将表另存为..."
!
!
! Dialog ICC_PROFILE_LIST_DM
!
title_profile_list "ICC 配置文件"
profile_list_dir "配置文件目录"
profile_list_icm "ICM"
profile_list_rfp "RFP"
!
!
! Dialog ICC_GRAD
!
title_icc_grad  "ICC 配置文件渐变查看器"
!
!
! Dialog INFO_DLG 
!
title_info_dlg  "信息"
!
! Dialogs INK_LIMIT, INK_LIMIT_NCLR6_DLG
! and INK_LIMIT_NCLR6_COMPLEX_DLG
!
title_ink_limit  "油墨限制"
ink_limit_one_ch "一个通道"
ink_limit_two_ch "两个通道"
ink_limit_three_ch "三个通道"
ink_limit_four_ch "四个通道"
ink_limit_print  "打印"
ink_limit_details "详细..."
ink_limit_complex "复杂..."
ink_limit_discard "放弃详细设置"
ink_limit_incl_k "包括 K"
ink_limit_perc  "(0 ... 100%)"
!
ink_limit_five_ch "五个通道"
ink_limit_six_ch "六个通道"
ink_limit_seven_ch "七个通道"
ink_limit_eight_ch "八个通道"
ink_limit_except "例外"
ink_limit_ch_name "通道名称"
!
title_ink_limit_complex "详细油墨限制" 
!
!
! Dialog INK_LIMIT_COMPLEX
!
title_il_complex  "油墨限制详细"
il_complex_sum   "总量"
!
!
! Dialog INK_LIMIT_DETAIL 
!
title_il_details  "油墨限制细节"
il_details_k   "CMYK 中的 K"
!
!
! INKLIMIT_WIZARD 
!
title_il_wizard   "油墨限制"
il_wizard_discard  "放弃详细设置"
il_wizard_1_ch   "一个通道"
il_wizard_print   "打印"
il_wizard_2_ch   "两个通道"
il_wizard_details  "详细"
il_wizard_3_ch   "三个通道"
il_wizard_4_ch   "四个通道"
il_wizard_incl_k  "包括 K"
!
!
! Dialog INKSAVER_PREMIUM 
!
title_inksaver_premium "Ink Saver 省墨软件高级版"
inksaver_source   "源 ICC 配置文件（颜色匹配前您的文档的颜色空间）"
inksaver_target   "目标 ICC 配置文件（颜色匹配后的颜色空间）"
inksaver_k_sep   "黑色分色"
inksaver_keep_k   "保持纯黑"
inksaver_keep_col  "保持纯色"
inksaver_keep_k100  "保持 K100"
inksaver_bvc   "避免重影"
inksaver_ri    "CMYK-CMYK 呈色意向"
inksaver_is    "Ink Saver 省墨软件"
inksaver_sep_params  "RGB-CMYK 分色"
!
! All other text from dialog GCR_MATCH
!
!
! Dialog ISIS2NET_MEASUREMENTS 
!
isis2net_measurements "Eye-One iSis 2 NET 测量"
is2net_ref_file   "参考文件"
is2net_vendor_id  "供应商 ID" 
is2net_match_chart  "仅显示与参考文件匹配的测量值"
!
!
! Dialog KJ_ABOUT, FA_ABOUT and LP_ABOUT
!
title_about   "关于 COLOR TUNER"
product_copyright "ORIS COLOR TUNER // WEB ®"
version    "版本："
link_date   "链接日期："
copyright   "版权所有  1997 - !{YEAR}\nCGS Publishing Technologies International GmbH\nD-63512 Hainburg, Kettelerstraße 24, Germany" 
copyright2   "电话："
copyright3   "传真："
website    "网址："
email    "电子邮件："
version_info  "产品组件的版本信息"
lic_info_button  "许可信息..."
!
fa_title_about   "关于 Falbard AQUA"
lp_title_about   "关于 LabProof SE"
fa_product_copyright "Falbard AQUA"
lp_product_copyright "LabProof SE"
cgs_inside    "CGS 内部技术"
cma_cp_title_about   "关于 CMA ColorPortal"
cma_cp_product_copyright "CMA ColorPortal"
cma_cp_copyright   "CMA IMAGING \n8, Avenue de Finlande S.A.\n1420 Braine-l’Alleud, Belgium"
rco_title_about   "关于 Roland 颜色优化器"
rdc_title_about   "关于 Roland 设备检查器"
!
!
! Dialog LAB_GRD 
!
title_lab_grd   "根据 CIE-Lab 进行线性化"
lab_grd_meas   "测量"
lab_grd_active   "优化活动渐变"
lab_grd_smooth   "平滑"
lab_grd_set_max   "将最大颜色密度设为 100%"
lab_grd_opt    "选项"
!
!
! Dialog LICENSE_INFO
!
title_sw_license  "软件许可"
sw_lic_text1   "如果您有软件加密狗，请将它插入到计算机。"
sw_lic_text2   "如果没有，请用您的序列号和硬件 ID，在我们的网站 www.cgs.de 的产品激活下激活软件。 序列号打印在 CD 和交付清单中。"
hw_id     "硬件 ID："
sw_lic_text3  "稍后，您将通过电子邮件收到一份许可文件。 要加载此许可文件，请单击“许可”。"
license_button   "许可"
lic_info_ext_file_hdr "使用许可证文件进行许可"
lic_info_ext_file_txt "如果您收到了许可证文件，请添加许可证。" 
lic_info_ext_code_hdr "使用许可证代码进行在线许可"                          
lic_info_ext_code_act "如果您已收到许可证代码，请激活许可证。"         
lic_info_ext_act  "激活许可证" 
lic_info_ext_code_deact "若想在其他计算机上使用许可证代码，请在此计算机上停用许可证。"         
lic_info_ext_deact  "停用许可证" 
lic_info_ext_code_upd "如果您的许可证代码已更新，则可以立即安装更新。" 
lic_info_ext_upd  "更新许可证"
!
!
!
! Dialog LICENSE_INFO_EXT
!
title_license_info_ext  "许可信息"
lic_info_ext_hint   <Features marked with "*" are not available after the test period.>
lic_info_ext_ext   "延长"
lic_info_ext_lic_date  "许可到期日期："
lic_info_ext_test_date  "试用到期日期："
lic_info_ext_dlp_date		"DLP 创建到期日期"
lic_info_ext_dongle_date "加密狗日期："
lic_info_ext_dongle_id  "加密狗 ID 或序列号："
lic_info_ext_hw_id   "硬件 ID："
lic_info_ext_restart  "如果要添加新的许可证，您需要一个许可证文件或许可证代码。\n必须重新启动此程序。"
lic_info_ext_add   "添加许可"
!
!
! Dalog LIN_METHOD 
!
title_lin_method  "线性化方法"
lin_method_md   "Murray-Davies"
lin_method_yn   "Yule-Nielsen"
lin_method_meas   "测量线性化"
lin_method_yn_factor "YN 系数"
!
!
! Dialog MAKESKILL_DLG 
!
title_make_skills  "制作技巧"
make_skills_meas_dev "测量设备"
make_skills_dev   "设备"
make_skills_sel   "选择"
make_skills_values  "Skill 值"
make_skills_print  "打印 skill 图表"
make_skills_meas  "测量已打印的 skill 图表"
make_skills_load  "加载密度"
make_skills_save  "保存 Skill"
!
!
! Dialog MAXDENSITY 
!
title_max_dens   "最大颜色密度"
max_dens_method   "方法"
method_linear   "线性"
method_smooth1   "平滑 1"
method_smooth2   "平滑 2"
max_dens_warning  "此功能不稳定！"
max_dens_min   "最小"
max_dens_max   "最大"
!
!
! MEASDEV_PROPERTIES 
!
title_measdev_prop  "设备属性"
measdev_prop_status  "响应状态"
measdev_prop_filter  "过滤器"
measdev_prop_illum  "光源"
measdev_prop_obs  "标准观测器"
measdev_prop_meas_mode  "测量方法"
measdev_prop_meas_geometry "测量几何"
measdev_prop_beep   "设备发出信号"
!
!
! Dialog MEASDEVICE 
!
title_measdevice   "测量设备设置"
measdev_instrument   "设备"
measdev_port    "串行端口"
measdev_baud    "数据速率（波特）"
set_emb_measdev_xrga  "使用 XRGA 标准"
measdev_prop_button   "属性"
measdev_test_button   "测试"
measdev_abort_button  "中止"
!
!
! Dialog MEASURE_CHART 
!
title_measure_chart "测量测试图"
meas_device   "设备"
meas_chart_corr_opt "为光学增白剂加以校正"
meas_device_select "选择..."
reference_file  "参考文件"
browse_ref_file  "浏览..."
start_measurement "开始测量..."
remeasure_strip  "重新测量色带"
meas_chart_back  "<"
meas_chart_forw  ">"
!
!
! Dialog MEASURE_IMPIKA
!
title_measure_impika "测量 Impika 排名数据"
impika_color   "颜色"
impika_pattern_width "图案宽度"
impika_print_mode  "打印模式"
impika_drop_size  "墨滴大小"
impika_serial   "打印头序列号"
impika_inches   "英寸"
impika_picoliter  "pL" 
!
!
! Dialog MEASUREMENT_AVERAGE 
!
title_meas_aver   "平均值测量文件"
meas_aver_files   "测量文件"
meas_aver_del   "删除文件"
meas_aver_add   "添加文件..."
meas_aver_save   "平均并保存..."
!
!
!  Dialog OSC_EDIT_FORM 
!
title_osc_edit   "定义品牌颜色"
osc_edit_hint   "所作修改将影响到全部队列。"
osc_edit_name   "名称"
osc_edit_copy   "复制"
!
!
! Dialog OUT_ICC_WIZ_INTRO
!  OUT_ICC_WIZ_MATCH_PROFILE
!  OUT_ICC_WIZ_COMPL
!
out_icc_wiz_header "输出 ICC 配置文件向导"
out_icc_wiz_hint "使用此向导创建当前队列的一个 ICC 输出配置文件。"
out_icc_wiz_complete "新的 ICC 输出配置文件已保存于此处："
title_OUT_ICC_WIZ_MATCH_PROFILE     "匹配 ICC 输出配置文件"
out_icc_wiz_match_hint	"如已知，则选择与新的输出 ICC 配置文件相匹配的 ICC 输入配置文件。 如不确定，则选择 'PCS 参考介质'。"
out_icc_wiz_match_prm "PCS 参考介质"
out_icc_wiz_match_huge "巨大"
out_icc_wiz_match_file "ICC 输入配置文件"
!
!
! Dialog OUT_ICC_WIZ_PRISM_OPT
!
prism_parameter_title "ICC 配置文件生成的参数"
prism_INTEL_BLACK  "使用智能黑色"
prism_USE_MAX_BLACK  "使用最大黑色"
prism_INK_LIMIT   "油墨限制"
prism_BLACK_START  "黑色起点"
prism_MAX_BLACK   "最大 黑色"
prism_BLACK_CURVE_TYPE "黑色曲线类型"
prism_BLACK_WIDTH  "黑色宽度"
prism_NEUTRALIZE_GRAY "中性灰"
!
!
! Dialog PRISM_OPT_FIX_MEAS
!
prism_opt_title   "选项 >>"
prism_opt_meas   "测量"
prism_opt_profile  "配置文件"
prism_opt_saturation "饱和度"
prism_opt_contrast  "对比度"
prism_opt_neutral  "中性量"
prism_opt_black_smooth "平滑度"
prism_opt_gray   "灰色"
prism_opt_hue   "色调相似性"
prism_opt_a2b_size  "A2B 尺寸"
prism_opt_b2a_size  "B2A 尺寸"
prism_opt_separ   "分色"
prism_use_std_val  "使用标准值"
prism_opt_max_black  "使用最大黑色"
maximum_k    "最大黑色"
perception    "感知"
tables     "表" 
prism_bit_depth   "位深" 
CALC_ICC_button   "计算配置文件"
prism_opt_version  "版本"
prism_opt_pro_ver  "配置文件版本"
!
!
! Dialog XG2_ICC_OPT
!
xg2_black_max				"最大值"
xg2_black_width				"宽度"
xg2_more					"更多"
xg2_contrast				"对比度"
xg2_saturation				"饱和度"
xg2_bleed					"出血"
xg2_gamutmap				"色域映射"
!
!
! Dialog PR_ADJUST
!
title_pr_adjust_ct6   "打印布局"
pr_adjust_set_button  "布局调整和大小..."
pr_adjust_set_header  "打印设置"
pr_adjust_imp    "双面打印"
pr_adjust_sep    "单一分色"
pr_adjust_filter   "应用过滤器"
pr_adjust_alpha_ign   "应用 TIFF 格式图像的 alpha 通道"
pr_adjust_mirror   "翻转"
pr_adjust_invert   "反转"
pr_adjust_mod    "修改..."
pr_adjust_k100    "保留全 K100"
pr_adjust_k100_cmy   "仅保留 K100 和颜色正确的 CMY 值" 
pr_adjust_sharp_hdr   "图像锐化"
pr_adjust_sharpen   "锐化图像"
pr_adjust_factor_all  "所有图像的锐化系数"
pr_adjust_factor_scaled  "仅限缩放图像的系数"
pr_adjust_interpol   "图像插值"
pr_adjust_interpol_no  "否"
pr_adjust_interpol_lin  "线性"
pr_adjust_interpol_cubic "双三次"
pr_adjust_fine    "精细打印"
pr_adjust_misreg   "重合失调"
pr_adjust_misreg_sub  "应用重合失调"
pr_adjust_flexo				"纸张模拟"
pr_adjust_flexo_use			"应用纸张模拟"

!
! All other text from dialog PR_ADJUST
!
!
! Dialog PR_ADJUST_CT6
!
! All text from dialog PR_ADJUST
!
!
! Dialog PR_ADJUST_USER
!
title_adjust_user   "调整和大小"
adjust_user_orig   "原始大小和方向"
adjust_user_auto_scale  "自动缩放"
adjust_user_auto_rot  "自动旋转"
adjust_user_scaling   "缩放"
adjust_user_scale			"比例"
scale_shrink    "收缩至纸张大小"
scale_scale     "缩放至纸张大小"
scale_factor    "系数"
adjust_user_scale_x   "缩放系数 X"
adjust_user_scale_y   "缩放系数 Y"
adjust_user_prop   "保持比例"
adjust_user_orient   "方向"
!
!
! Dialog PR_BLEED
!
title_pr_bleed    "标记/信息"
pr_bleed_header    "标题"
pr_bleed_additional   "更多..."
pr_bleed_errors    "错误"
pr_bleed_font_size   "标题字体大小"
pr_bleed_logo    "客户标识"
pr_bleed_logo_cert   "为自动认证\n而设的客户标识 认证"
pr_bleed_marks_page   "页面标记 / 出血自版页..."
!
!
! Dialog PR_BLEED_ALL 
!
title_pr_bleed_all   "页面标记/出血自版页"
pr_bleed_none    "无"
pr_bleed_marks    "页面标记"
pr_bleed_crop    "裁切标记"
pr_bleed_outline   "轮廓"
pr_bleed_corners   "角"
pr_bleed_offset    "角偏移"
pr_bleed_reg    "注册标记"
pr_bleed_cross    "交叉"
pr_bleed_cross_circle  "交叉和环绕"
pr_bleed_scale    "色阶"
pr_bleed_scale_perc   "10% 至 100% 缩放"
pr_bleed_page    "出血自版页"
pr_bleed_units    "测量\n单位"
pr_bleed_align    "Roland 打印机对齐点"
pr_align_none    "无"
pr_align_roland    "打印"
pr_align_roland_mirrored "打印镜像"
!
!
! Dialog PR_BLEED_MARKS 
!
title_pr_bleed_marks  "页面标记"
!
!
! Dialog PR_BLEED_PAGE 
!
title_pr_bleed_page   "出血自版页"
!
!
! Dialog PR_COLOR_SETTINGS
!
title_vorlage    "颜色设置"
pr_col_set_cal    "校准"
pr_col_set_col_corr   "颜色校正"
pr_col_set_spot_corr  "专色校正"
!
!
! Dialog PR_COLORS(_DP)
!
title_pr_colors    "颜色校正"
pr_colors_emb_prof   "内嵌的配置文件（常用于 PDF/X 文件）"
pr_colors_def    "默认配置文件"
pr_colors_rgb    "RGB"
pr_colors_hex    "高保真六色、GOP、\nN 通道、高保真色彩"
pr_colors_hexachrome  "高保真六色" 
pr_colors_output   "输出颜色空间"
pr_colors_none    "无/未定义"
pr_colors_icc_only   "仅限 ICC 配置文件"
pr_colors_sel    "选择配置文件..."
pr_colors_cc_table   "!{OEM_ORIS__DAT} 颜色表"
emb_prof_try    "如有则直接应用，无则应用默认配置文件"
emb_prof_always				"始终使用默认配置文件"
emb_prof_never    "在 !{OEM_ORIS__DAT} 文件中使用配置文件或分色表"
pr_colors_pdf    "PDF/X 输入文件"
pr_colors_ignore   "使用内嵌的配置文件和输出意向，忽略配置文件设置"
!
fp_adapt_enter_target_pw	"适应目标纸白色…"
fp_adapt_enter_pw			"适应打样纸白色..." 
!
!
! Further ICC settings used in MF_FP_PICCONVERT_COLORM_PAR and MF_FP_COLORM_PAR
!
emb_prof_default  "忽略，然后应用默认配置文件"
emb_prof_dat   "在 !{OEM_ORIS__DAT} 文件中使用配置文件或分色表"
emb_prof_apply_or_none "如有则直接应用，无则不进行颜色校正"
emb_prof_try_cancel  "应用，如果并非所有图像都有则取消输出"
!
!
! Dialog PR_COLORS_SUB 
!
title_pr_colors_sub   "选择 ICC 配置文件"
pr_colors_sub_col_space  "文档颜色空间"
pr_colors_sub_hint   "PDF/X 文件：始终使用内嵌的配置文件并与输出意向匹配。"
pr_colors_sub_other   "其他文档："
pr_colors_sub_ues_emb  "使用内嵌的配置文件（如果有），否则使用以下默认配置文件："
pr_colors_rgb_profile  "RGB 配置文件"
pr_colors_sub_target  "目标颜色空间"
pr_colors_sub_hint_2  "PDF/X 文件：使用输出意向（如果有），否则使用以下配置文件："
pr_colors_sub_cmyk_prof  "CMYK 配置文件"
pr_colors_sub_dev   "设备颜色空间"
pr_colors_sub_proof   "打样配置文件"
!
!
! Dialog PR_DOTPROOF 
!
title_pr_dotproof   "网点打样设置"
pr_dotproof_quality   "网点打样质量"
dp_standard     "标准"
dp_medium     "中"
dp_high      "高"
!
!
! Dialog PR_DOTPROOF_CCM 
!
title_pr_dp_ccm    "网点打样设置"
pr_dp_ccm_quality   "网点打样质量"
pr_dp_ccm_limit    "油墨限制"
pr_dp_ccm_1_ch    "一个通道（最大  100%)"
pr_dp_ccm_4_ch    "四个通道（最大 400%)"
pr_dp_ccm_gamma    "伽玛"
pr_dp_ccm_gamma_0_4   "伽玛：(0.0 ... 4.0)"
!
!
! Dialog PR_DOTPROOF_TI 
!
title_pr_dp_ti    "网点打样设置"
pr_dp_ti_res    "网点打样分辨率"
pr_dp_ti_angles    "网屏角度"
pr_dp_ti_spot1    "专色 1"
pr_dp_ti_spot2    "专色 2"
pr_dp_ti_spot3    "专色 3"
pr_dp_ti_spot4    "专色 4"
pr_dp_ti_degree				"+ 7,5°"
pr_dp_ti_def    "默认"
!
!
! Dialog PR_DP_ADJUST 
!
title_pr_dp_adjust  "打印布局"
pr_dp_adjust_settings "布局调整和大小..."
pr_dp_adjust_set_header "打印设置"
!
!
! Dialog PR_DP_ADJUST_USER
!
title_dp_adjust_user  "调整和大小"
!
!
! Dialog PR_DP_BLEED 
!
title_pr_dp_bleed  "标记/信息"
!
!
! Dialog PR_DP_CERTIFICATION 
!
title_pr_dp_cert  "认证"
pr_dp_cert_target  "认证以下\n打印目标"
pr_dp_cert_cert_required "要求打样认证（认证结果将显示在 ORIS COLOR TUNER // WEB 中）"
pr_dp_cert_col_bar  "颜色条"
pr_dp_cert_auto_meas "自动测量颜色条"
pr_dp_cert_ref   "颜色条参考"
pr_dp_cert_dry_time  "干燥时间（单位：分钟）"
pr_dp_cert_dir   "测量文件的\n目录"
pr_dp_cert_spectral  "写入光谱数据而不是 Lab 值"
pr_dp_cert_pos   "位置"
!
!
! Dialog PR_DP_COLORS 
!
title_pr_dp_colors  "颜色校正"
pr_dp_colors_icc  "ICC 配置文件"
pr_dp_colors_target  "目标 (CMYK)"
pr_dp_colors_proof  "打样"
!
!
! Dialog PR_DP_ROLAND 
!
title_pr_dp_roland  "Roland"
pr_dp_roland_return  "打印后返回原件"
pr_dp_roland_align  "对齐点"
pr_roland_none   "无"
pr_roland_print   "打印"
pr_roland_print_mirrored "打印镜像"
pr_roland_apply   "应用"
pr_dp_roland_ovp  "叠印"
pr_dp_roland_times  "次"
pr_dp_roland_vacuum  "真空打印"
pr_dp_roland_panel  "打印机面板"
pr_dp_roland_default "默认"
pr_dp_roland_high  "高"
pr_dp_roland_low  "低"
pr_dp_roland_speed  "打印头速度"
milimeters_per_second "毫米/秒"
pr_dp_roland_space  "纸张空间"
pr_dp_roland_height  "打印头高度"
pr_dp_roland_ignore  "忽略"
pr_dp_roland_feed  "进纸校准"
pr_dp_roland_use_varnish "上光"
pr_dp_roland_silver  "金属色"
pr_dp_roland_ink  "金属色油墨"
pr_dp_roland_varnish "上光名称"
pr_dp_roland_color_names "颜色名称..."
pr_dp_roland_duty  "金属色油墨不透明度"
!
!
! Dialog PR_DP_TREIBER 
!
title_pr_dp_driver  "驱动程序"
pr_dp_driver_manu  "制造商"
pr_dp_driver_model  "型号"
pr_dp_driver_col_mode "颜色模式"
pr_dp_driver_neutral "中性灰"
pr_dp_driver_increase "提高油墨覆盖率"
pr_dp_driver_cmyk  "CMYK 驱动程序"
pr_dp_driver_col_method "打印方法"
pr_dp_driver_settings "网点打样设置..."
pr_dp_driver_adv  "高级打印设置"
prt_dp_quality_standard "标准品质"
prt_dp_quality_improved "改良品质"
!
!
! Dialog PR_EMAIL_EVENTS 
!
title_pr_email   "电子邮件通知"
pr_email_send   "发送电子邮件通知"
pr_email_always   "所有类型"
pr_email_cat   "对于以下类型的所有事件："
pr_email_infos   "信息"
pr_email_warn   "警告"
pr_email_succ   "成功"
pr_email_err			"错误"
pr_email_sp    "对于特定事件："
pr_email_if_sp   "软打样正在创建"
pr_email_sp_rej   "软打样可用"
pr_email_start   "输出已启动"
pr_email_term   "输出已完成"
pr_email_err_fold  "作业已复制至错误文件夹"
pr_email_succ_fold  "作业已复制至成功文件夹"
pr_email_cert_requ  "要求认证"
pr_email_add_scatter "作业已添加到散拼打样表格中"
!
!
! Dialog PR_FILEHANDLING
!
title_pr_filehandling  "成功/错误处理"
pr_filehandling_success  "如果成功"
pr_filehandling_copy_succ "将作业复制至成功文件夹"
pr_filehandling_del   "从队列中删除作业"
pr_filehandling_error  "如果出错"
pr_filehandling_copy_err "将作业复制至错误文件夹"
!
!
! Dialog PR_FILTER, PR_DP_FILTER 
!
title_pr_filter   "过滤器"
pr_filter_start   "起始油墨覆盖率"
pr_filter_start_value "颜色起始值 (0...20%)"
pr_filter_noise   "杂色"
pr_filter_dp   "(0...100%)"
pr_filter_cyan   "青色 (0...100%)"
pr_filter_magenta  "洋红色 (0...100%)"
pr_filter_yellow  "黄色 (0...100%)"
pr_filter_key   "黑色 (0...100%)"
pr_filter_same   "所有通道使用相同的杂色"
!
pr_filter_noise_def  "默认设置"
!
!
! Dialog PR_FLEXO 
!
title_pr_flexo   "纸张模拟"
pr_flexo_texture  "织纹"
pr_flexo_dens   "织纹密度"
pr_flexo_rotate   "旋转织纹"
!
!
! Dialog PR_HPDJZ_ADVANCED 
!
title_pr_hp_advanced "HP Designjet Z 系列工具"
hp_tool_keep_width  "保持图像宽度"
hp_tool_advanced  "测量图表"
!
!
! Dialog PR_IMAGEOUT 
!
title_pr_imageout  "打印至文件"
pr_imgout_dir   "输出目录"
pr_imgout_res   "分辨率"
pr_imgout_comp   "压缩"
!
!
! Dialog PR_IMPOSITION 
!
title_pr_imposition  "双面打印 - 偏移"
pr_imposition_odd  "奇数页偏移量"
pr_imposition_top  "顶部"
pr_imposition_left  "左"
pr_imposition_even  "偶数页偏移量"
!
!
! Dialog PR_KALIB 
!
title_pr_kalib  "校准"
pr_kalib_hdr  "线性化和校准"
pr_kalib_none  "无"
pr_kalib_table  "表"
pr_kalib_lin  "线性化"
pr_kalib_cal  "校准"
pr_kalib_recal  "重新校准"
pr_kalib_sched  "时间表..."
!
!
! Dialog PR_LOADBALANCE
!
title_pr_loadbalance "负载均衡"
pr_load_balance_queue "队列"
pr_load_balance_hint "为这些队列之间的负载均衡作业添加队列"
pr_load_balance_all  "所有队列"
!
!
! PR_MAIN
!
title_pr_main  "打印"
pr_main_printer  "打印机"
pr_main_queue  "队列"
pr_main_job   "作业"
pr_main_copies  "副本"
pr_main_print_file "打印文件" 
pr_main_presets  "预设"
pr_main_test_batch "创建批量测试..."
pr_main_options  "选项 >>"
!
!
! Dialog PR_MISREG 
!
title_pr_misreg   "重合失调"
pr_misred_add_spot  "添加专色"
pr_misred_reset   "重设值"
pr_misred_clear   "清除所有值"
pr_misreg_h_mismatch "水平不匹配"
pr_misreg_mm   "毫米"
pr_misreg_v_mismatch "垂直不匹配"
pr_misreg_h_dist  "水平失真"
pr_misreg_v_dist  "垂直失真"
!
!
! Dialog PR_PAPIER
!
title_pr_paper   "纸张"
pr_papier_type   "纸张类型"
pr_papier_upd   "纸张列表更新..."
pr_papier_res   "分辨率"
pr_papier_qual   "质量"
pr_papier_mode   "打印模式"
pr_papier_source  "纸张来源"
pr_paper_bk_sharp  "BK（锐利）"
pr_papier_width   "宽度"
pr_papier_size   "纸张大小"
pr_papier_height  "高度"
pr_papier_tray   "出纸盘"
pr_papier_cut   "自动切割"
pr_papier_line   "打印分页线"
pr_nozzle_check   "打印喷嘴测试图案"
pr_auto_roll   "自动滚动源选择"
pr_chroma_opt   "色度优化器"
pr_auto     "自动"
pr_all     "全部"
pa_print_borderless		"无边距打印"
!
!
! Dialog PR_PRINT_INFO 
!
title_pr_print_info  "额外信息"
pr_print_info_opt  "可选信息行"
pr_print_info_program "程序信息"
pr_print_info_doc  "文档名称和大小"
pr_print_info_inch  "大小（单位：英寸）"
pr_print_info_date  "日期和时间"
pr_print_info_user  "用户名"
pr_print_info_colcorr "颜色校正信息"
pr_print_info_dat  "!{OEM_ORIS__DAT} 文件的组件"
pr_print_info_complete "通过完整的路径名称指定文件"
pr_print_info_params "打印参数"
pr_print_info_queue  "队列名称"
pr_print_info_qual  "程序参数/限定符（用于提供支持）"
!
!
! Dialog PR_PRINTPARAMETERS
!
title_pr_printparameters "工作流程"
pr_pripa_softproof "软打样已启用"
pr_pripa_icc  "ICC 输出特性文件"
pr_pripa_sp_requ "需要软打样"
pr_pripa_set  "软打样设置"
pr_pripa_email  "电子邮件通知"
pr_pripa_address "电子邮件地址"
pr_pripa_events  "想要通知的事件..."
pr_pripa_wf   "监视文件夹"
pr_pripa_input_folder "输入文件夹"
pr_pripa_subdir  "扫描子目录"
pr_pripa_wait  "手动启动作业（如等待查看预览）"
pr_pripa_prev  "创建缩略图和预览"
pr_pripa_all_pages "为所有页面启用预览"
pr_pripa_max_jobs	"要同时处理的最大作业数量"
!
!
! Dialog PR_PS_ADJUST
!
title_pr_ps_adjust  "打印布局"
pr_adjust_layout  "布局调整"
pr_ps_adjust_orig  "原始大小和方向"
pr_ps_adjust_auto  "自动"
pr_ps_adjust_rot		"旋转"
pr_ps_adjust_scale		"比例"
pr_ps_adjust_user  "用户定义"
pr_adjust_center  "居中"
pr_adjust_center_no  "否"
pr_adjust_center_width "宽和高"
pr_adjust_center_height "宽度"
pr_ps_adjust_2sided  "双面打印"
pr_ps_adjust_use_2sided "应用双面打印"
pr_ps_adjust_res_drvr "使用打印机驱动程序的分辨率" 
pr_adjust_scale			"比例"
pr_adjust_scale_x  "缩放系数 X"
pr_adjust_scale_y  "缩放系数 Y"
pr_adjust_prop   "保持比例"
pr_adjust_orientation "方向"
!
!
! Dialog PR_PS_ADJUST_CT6
!
pr_ps_adjust_auto_scale "自动缩放"
pr_ps_adjust_auto_rot "自动旋转"
pr_ps_adjust_center  "居中"
pr_adjust_scaling  "缩放"
!
!
! Dialogs PR_ROLAND
!
title_pr_roland    "Roland"
pr_roland_contour   "轮廓切割"
pr_roland_cut_only   "仅切割"
pr_roland_cut_img_bound  "切割图像边界"
pr_roland_cut_img_return "切割后返回原件"
pr_roland_cut_contour  "切割轮廓"
pr_roland_cut_vacuum  "真空切割"
pr_roland_more    "高级设置"
pr_roland_passes   "切割次数"
pr_roland_times    "次"
pr_roland_speed    "速度"
pr_roland_press    "压力"
pr_roland_gf    "gf"
pr_roland_blade    "切刀偏移"
!
! Dialogs PR_ROLAND and SETUP_WIZ_MUTLIPASS
!
matte_varnish   "哑光上光"
gloss_varnish				"高光上光"
embossing	"压花"
!
!
! Dialog PR_ROLAND_COLDFOIL 
!
title_pr_roland_coldfoil "冷箔清漆设置"
pr_roland_coldfoil_name  "上光名称"
pr_roland_coldfoil_duty  "上光油墨不透明度"
pr_roland_coldfoil_channels "清漆油墨通道"
pr_roland_coldfoil_uv_ctrl "紫外灯控制" 
pr_roland_lamp_pos   "位置"
pr_roland_home    "主页"
pr_roland_front    "封面"
pr_roland_lamp_pos_l  "左灯"
pr_roland_lamp_pos_r  "右灯"
pr_roland_lamp_power_header "功率"
pr_roland_lamp_power  "头移动，从"
pr_roland_head_r_l   "右至左"
pr_roland_head_l_r   "左至右"
!
!
! Dialog PR_ROLAND_CUT 
!
title_PR_ROLAND_CUT   "切割设置"
pr_roland_color_names  "颜色名称..."
pr_roland_list_panel  "打印机面板"
pr_roland_default   "默认"
pr_roland_high    "高"
pr_roland_low    "低"
pr_roland_perf_cut   "穿孔切割"
pr_roland_cut_length  "切割长度"
pr_roland_score_length  "穿孔长度"
pr_roland_score_force  "穿孔压力" 
pr_roland_perf_cut_contour "穿孔切割轮廓"
!
!
! Dialog PR_ROLAND_EX 
!
title_pr_roland_ex  "Roland"
pr_roland_head_speed "打印头速度"
pr_roland_drying_time "进纸前的干燥时间"
pr_roland_multipass  "多次打印序列"
pr_roland_colors  "颜色"
pr_roland_ex_ovp  "叠印"
pr_roland_ex_var_mode "上光模式"
pr_roland_ex_pass1		"1. 通道"
pr_roland_ex_pass2		"2. 通道"
pr_roland_ex_pass3		"3. 通道"
pr_roland_ex_maxspeed "最大 速度"
pr_roland_ex_white  "白色设置"
pr_roland_ex_var_set "上光设置"
pr_roland_ex_silver  "金属色设置"
pr_roland_uv_set  "紫外灯设置"
pr_roland_cf_set  "冷箔清漆设置"
pr_roland_ex_cut  "切割"
pr_roland_ex_printer "打印机"
pr_roland_add_set  "其他设置"
pr_roland_ex_pink  "粉红色设置"
!
!
! Dialog PR_ROLAND_PRINTER
!
title_pr_roland_printer "其他打印机设置"
pr_roland_align   "打印/应用对齐点"
pr_roland_space   "纸张空间"
pr_roland_control  "使用 Intelligent Pass Control"
pr_roland_height  "打印头高度"
pr_roland_ignore  "忽略"
pr_roland_vacuum  "真空打印"
pr_roland_feed   "进纸校准"
pr_roland_panel   "打印机面板"
pr_roland_clean_while_printing "打印时清洁"
pr_roland_user_def  "用户定义"
pr_roland_wiping  "擦拭"
pr_roland_less   "较少"
pr_roland_normal  "正常"
pr_roland_medium  "中等"
pr_roland_clean_time "清洁间隔"
!
!
! Dialog PR_ROLAND_SILVER
!
title_pr_roland_silver  "金属色设置"
pr_roland_silver   "金属色"
pr_roland_silver_ink  "金属色油墨"
pr_roland_silver_duty  "金属色油墨不透明度"
!
!
! Dialog PR_ROLAND_VARNISH
!
title_pr_roland_varnish  "上光设置"
pr_roland_varnish   "上光"
pr_roland_varnish_name  "上光名称"
pr_roland_varnish_duty  "上光油墨不透明度"
!
!
! Dialog PR_ROLAND_WHITE  
!
title_pr_roland_white  "白色设置"
pr_roland_print_white  "使用白色油墨打印"
pr_roland_white_sep   "白色分色（专色）"
pr_roland_white_bck_areas "已打印区域的背景"
pr_roland_white_ink_cover "油墨覆盖率 (0...100%)"
pr_roland_white_bck_page "整个页面的背景"
pr_roland_white_duty  "白色油墨不透明度"
white_high_density   "高对比度白色" 
pr_roland_white_tinted  "白色涂布"
pr_roland_white_merge_mode	"重叠的白色分色"
merge_mode_max				"使用最大值"
merge_mode_add				"将值加在一起"
!
!
! Dialog PR_ROLAND_PINK
!
title_pr_roland_pink  "粉红色设置"
pr_roland_pink   "粉红色"
pr_roland_pink_name  "粉红色名称"
pr_roland_pink_duty  "粉红色油墨不透明度"
!
!
! Dialog PR_SAVE_AS 
!
title_pr_sqave_as "复制队列"
pr_save_as_complete "复制队列设置文件（不链接至原始文件）"
pr_save_as_hint  "请为 COLOR TUNER 队列输入新名称"
pr_save_as_exist "现有队列"
pr_save_as_new  "新队列"
pr_save_as_wf  "监视文件夹"
pr_save_as_select_create_vp "创建虚拟打印机"
!
!
! Dialog PR_SCATTERPROOF_SETTINGS 
!
title_pr_scatter "散拼打样"
pr_scatter_use  "使用散拼打样"
pr_scatter_print "打印作业："
pr_scatter_auto  "散拼打样表单已满时自动执行"
pr_scatter_intervals "在散拼打样表单已满时按照以下时间间隔自动执行，\n 最迟："
pr_scatter_manu   "手动通过“实用程序 | 散拼打样管理器”执行（作业顺序会被重新编排）"
pr_scatter_info   "每个文档的额外信息"
pr_scatter_other  "其他..."
pr_scatter_colbar  "颜色条"
pr_scatter_paper  "纸张使用情况..."
pr_scatter_oversize  "过大的文档..."
pr_scatter_layout  "文档布局..."
!
!
! Dialog PR_SECOND_DAT 
!
title_pr_second_dat  "二次颜色校正（二次 DAT）"
pr_second_dat_file  "二次颜色校正文件"
pr_second_dat_none  "无"
pr_second_dat_table  "表"
!
!
! Dialog PR_SEPARATIONS 
!
title_pr_separations "分色"
pr_separations_col_comb "印刷色组合"
pr_separation_all  "合并打印所有分色"
pr_separation_sep  "分别打印所有专色分色"
pr_separation_gray  "以灰度模式打印单一分色"
!
!
! Dialog PR_SOFTPROOF_SETTINGS 
!
title_pr_sp_set  "软打样设置"
pr_sp_set_file  "软打样文件"
pr_sp_set_res  "输出分辨率"
pr_sp_set_comp  "图像压缩"
sp_compr_jpeg  "JPEG"
sp_compr_jpeg2000 "JPEG 2000"
pr_sp_set_options "软打样选项"
pr_sp_set_val  "监视器校准的有效性（单位：天）"
pr_sp_set_min  "监视器和输出配置文件之间的最低色域匹配（单位：%）"
pr_sp_set_d_max  "最大 Delta E"
!
!
! Dialogs PR_SPOCO, PR_SPOCO_NO_WHITE, RFP_WIZ_SPOCO
!
title_pr_spoco   "专色校正"
pr_spoco_scc   "专色校正"
pr_spoco_none   "无"
pr_spoco_table   "表"
pr_spoco_use_cal  "使用含专色校正的校准"
pr_spoco_use_cxf  "管理 PDF 文件中的 CxF/X-4 数据"
pr_spoco_strict   "检查具体的专色后缀名"
pr_spoco_use_cxf_always "始终使用 CxF/X-4"
pr_spoco_sp_sub   "颜色替换"
pr_spoco_white_ink  "使用白色油墨打印"
pr_spoco_white_sep  "白色分色（专色）"
pr_spoco_col_names  "颜色名称..."
pr_spoco_white_back  "已打印区域的背景"
pr_spoco_ink_cov  "油墨覆盖率 (0...100%)"
pr_spoco_white_compl "整个页面的背景"
pr_spoco_duty   "白色油墨不透明度"
pr_spoco_tint   "白色涂布"
pr_spoco_strict_spot "如果 SCG 文件中缺少专色，取消输出"
pr_spoco_crea_col_atl "定义视觉专色" 
pr_spoco_edit_private_osc "定义品牌颜色"
!
title_rfp_wiz_spoco_spoco "白色油墨"
!
!
! Dialog PR_WHITE_FOR_CHART 
!
title_white_for_chart "白色油墨背景"
!
!
! Dialog PRESSMATCHER 
!
title_pressmatcher   "ICC 颜色空间变换"
pressmatcher_source   "源 ICC 配置文件（颜色匹配前您的文档的颜色空间）"
pr_pressmatcher_meas  "测量..."
pressmatcher_target   "目标 ICC 配置文件（颜色匹配后的颜色空间）"
pressmatcher_total   "匹配后的油墨总覆盖率"
pressmatcher_keep_k   "保持纯黑"
pressmatcher_keep_col  "保持纯色"
pressmatcher_ri    "CMYK-CMYK 呈色意向"
pressmatcher_sep   "RGB-CMYK 分色"
!
!
! Dialog PRINT_ON_EPSON_ADVANCED 
! (For internal use only!)
!
!
! Dialog PRINTER_LIST_DLG 
!
title_printer_list_dlg  "打印机驱动程序列表"
printer_driver_list   "打印机驱动程序："
!
!
! Dialog PRINTER_STATUS 
!
title_printer_status  "打印机状态"
printer_status_pri   "打印机"
printer_status_auto   "自动更新，每隔"
printer_status_update  "更新"
printer_status_port   "打印机端口"
printer_status_queue  "队列状态"
printer_status_num_jobs  "队列中的作业数量"
printer_status_meas_dev  "测量设备"
printer_status_meas_dev_upd "更新"
printer_status_ip   "打印机 IP 地址"
printer_status_serial  "打印机序列号"
printer_status_model  "打印机型号"
printer_status_state  "打印机状态"
printer_status_media  "介质类型"
printer_status_ink_levels "油墨量"
!
!
! Dialog PROGRESS_DIALOG 
!
title_progress_dialog "进度"
progress_load   "正在加载文档..." 
progress_view   "查看日志"
!
!
! Dialog PSP_SUBDIALOG_A
!
title_psp_subdialog_a "定义 OPI 路径"
psp_a_use_opi   "使用 OPI 备注"
psp_a_dir    "目录"
!
!
! Dialog PSP_SUBDIALOG_B 
!
title_psp_subdialog_b "高级 PostScript/PDF 参数"
psp_b_trap    "使用套印"
psp_b_compl    "叠印灰度图像的复杂透明度"
psp_b_grayscale   "将灰度图像设置为叠印"
psp_b_keep_ps_spot  "保持 Photoshop V2.5 - 4 图像专色分色"
psp_b_min_width   "线最小宽度"
psp_b_knockout   "始终分离白色"
psp_b_increase   "增加色彩区域大小和图像裁剪路径"
psp_b_ignore   "忽略 Flate 压缩数据的校验和不匹配"
psp_b_repair_ill  "修复缺损的 Illustrator 渐变（专色会被转换为 CMYK）"
psp_b_pdf_rot   "应用并删除 PDF 方向键"
psp_b_omit    "忽略不活动的 Acrobat 图层"
psp_b_ovp_icc   "将叠印应用至基于 ICC 的 CMYK 色彩"
psp_b_acr_comp   "使用 Acrobat 兼容模式"
psp_b_comp_acr7   "Acrobat 7 或之前版本"
psp_b_comp_acr8   "Acrobat 8 或之后版本"
!
!
! Dialog PSP_SUBDIALOG_C
!
title_psp_subdialog_c "印前参数"
psp_c_cancel   "发生以下情况即取消打印作业"
psp_c_miss_fonts  "字体缺失"
psp_c_nonemb_fonts  "字体未嵌入"
psp_c_nonemb_fonts_cap "字体未嵌入"
psp_c_rgb    "使用了 RGB 数据"
psp_c_allow_rgb   "允许 ICCBased RGB" 
psp_c_lab    "使用了 Lab 数据"
psp_c_allow_lab   "允许 ICCBased Lab"
psp_c_icc    "使用了内嵌的 ICC 配置文件"
psp_c_hairlines   "使用了细线"
psp_c_ovp_white   "使用了叠印白色"
psp_c_ovp_other   "K100 以外的颜色使用了叠印"
psp_c_spots    "使用了专色"
psp_c_spots_ambig  "专色有多个 CMYK 对等色"
psp_c_jpeg_decomp  "JPEG 解压缩时发生警告"
psp_c_jpeg_hr_miss  "高分辨率 OPI 图像缺失"
psp_c_img_res_below  "图像分辨率低于"
psp_c_img_res_above  "图像分辨率超过"
psp_c_col_val_exc_perc "%"
psp_c_col_val_exc  "图像中对象的颜色值超过"
psp_c_on_img_exceed  "该图像面积为"
psp_c_page_width  "页面宽度超过"
psp_c_page_height  "页面高度超过"
psp_c_bleed    "出血少于"
psp_c_pdf    "PDF 版本高于"
psp_c_pdf_comply  "PDF 文件不兼容"
psp_c_pdf_1a_2001  "PDF/X-1a:2001"
psp_c_pdf_3_2002  "PDF/X-3:2002"
psp_c_pdf_1a_2003  "PDF/X-1a:2003"
psp_c_pdf_3_2003  "PDF/X-3:2003"
!

!
! Notice to translators: 
! The next two strings form the sentence '(If) font xxxxx is used'
! In languages with different word order it might be necessary to leave the second string empty ("").
!
psp_c_font    "使用了"
psp_c_used    "字体"
!
!
! Dialogs SETUP_WIZ_CAL_CHART 
!    RECAL_WIZ_CAL_CHART  
!    
title_SETUP_WIZ_CAL_CHART  "校准测试图"
setup_wiz_cal_chart_info  "选择与测量设备有关的校准测试图。"
!
!
!
!
! Dialog RFP_CREATE
!
title_rfp_create  "创建参考打印机配置文件"
rfp_create_meas_file "测量文件"
rfp_create_gam_limit "色域限制程度"
!
!
! Dialog RFP_EDIT 
!
title_rfp_edit    "RFP 编辑器"
rfp_edit_fields_filter  "用于过滤匹配 RFP 文件的字段"
rfp_edit_printer   "打印机"
rfp_edit_type    "类型"
rfp_edit_fields_display  "仅供屏幕显示使用的字段"
rfp_edit_printer_dn   "PRINTER_DN"
rfp_edit_res_dn    "RESOLUTION_DN"
rfp_edit_comment   "备注"
rfp_edit_presets_apc  "APC 的预设"
rfp_edit_method    "打印方法"
rfp_edit_medium    "介质"
rfp_edit_pdpi    "PDPI"
rfp_edit_dither    "递色"
rfp_edit_qual    "质量"
rfp_edit_max_dens   "MAX_DENSITY"
rfp_edit_ink_limit   "INK_LIMIT"
rfp_edit_reset    "重设"
rfp_edit_grad    "渐变"
rfp_edit_num_inks   "NUM_INKS"
rfp_edit_firmware   "固件"
rfp_edit_scale    "缩放"
rfp_edit_raster    "RASTERRES/ANGLE"
rfp_edit_ink_duty   "INK_DUTY"
rfp_edit_white_ink   "WHITE_INK"
rfp_edit_white_duty   "WHITE_INK_DUTY"
rfp_edit_condition   "状态"
rfp_edit_rol_speed   "ROLAND_PRINT_SPEED"
rfp_edit_example   "示例"
rfp_edit_fill    "填充..."
rfp_edit_cop_all   "复制所有"
rfp_edit_copy    "复制"
!
!
! Dialog RFP_LIST 
!
title_rfp_list  "参考打印机配置文件"
rfp_list_dir  "目录"
rfp_list_frp  "RFP"
rfp_list_show  "还显示与打印机型号不匹配的文件"
!
!
! RFP_WIZ_PROP_SHEET  
! (No particular text)
!
!
! Dialog RFP_WIZ_COMMENT 
!
rfp_wiz_comment_tag  "输入备注"
rfp_wiz_comment_title "输入备注"
rfp_wiz_comment   "您可以选择在参考打印机配置文件中添加一则备注。"
!
!
! Dialogs RFP_WIZ_COMPL 
!         LIN_WIZ_COMPL
!
rfp_wiz_finished_tag "参考打印机配置文件向导"
rfp_wiz_finished_title "参考打印机配置文件向导"
rfp_wiz_grat   "恭喜！"
lin_wiz_finished_tag "线性化向导"
lin_wiz_finished_title "线性化向导"
lin_wiz_txt    "您的打印机现已完成线性化。"
!
!
! Dialog RFP_WIZ_EMBEDDED_MD 
!
rfp_wiz_emb_tag   "内嵌的分光光度计"
rfp_wiz_emb_title  "内嵌的分光光度计"
rfp_wiz_emb_sm   "此打印机有一个内嵌的分光光度计。"
rfp_wiz_emb_use_ext  "我希望使用外部分光光度计进行测量"
rfp_wiz_emb_use_emb  "我希望使用内嵌的分光光度计进行测量"
rfp_wiz_emb_dir   "测量文件的目录"
rfp_wiz_emb_note  "注意：内嵌的分光光度计只适用于纸张打样输出。 我们建议使用外部测量设备进行胶片打样输出。"
!
!
! Dialog RFP_WIZ_INK_LIMIT 
!
rfp_wiz_ink_limit_title "减少油墨覆盖率"
rfp_wiz_il_hint   "要缩短油墨干燥时间，建议限制油墨总覆盖率。"
rfp_wiz_use_il   "我想要限制油墨总覆盖率"
rfp_wiz_no_il   "我不想限制油墨总覆盖率"
!
!
! Dialog RFP_WIZ_INTRO 
!
rfp_wiz_intro_title  "参考打印机配置文件向导"
rfp_wiz_intro_welcome "欢迎使用"
rfp_wiz_intro_name  "参考打印机配置文件向导"
!
!
! Dialog RFP_WIZ_ITER_GRD 
!
rfp_wiz_iter_grd_tag "优化线性化"
rfp_wiz_iter_grd_title "优化线性化"
rfp_wiz_iter_grd_hint	"您可以通过进行额外的测量，以优化线性化。 建议进行两次测量。"
rfp_wiz_iter_grd_opt "我想要通过额外的测量以优化线性化"
rfp_wiz_iter_grd_finish "我想要完成线性化进程"
!
!
! Dialog RFP_WIZ_LIMIT 
!
rfp_wiz_limit_tag  "限制色域"
rfp_wiz_limit_title  "限制色域"
rfp_wiz_limit_hint  "参考打印机的色域必须比实际打印机的色域略小。"
rfp_wiz_limit_select "选择色域限制程度"
rfp_wiz_limit_rec  "我们建议选择“小”或“中等”。"
!
!
! Dialogs RFP_WIZ_LIMIT_NCLR_GRD and SETUP_WIZ_LIMIT_NCLR_GRD
!
title_rfp_wiz_limit_nclr_grd "最大目标密度"
rfp_wiz_limit_nclr_grd_txt  "设置最大目标密度"
rfp_wiz_limit_nclr_grd_meas  "测量"
rfp_wiz_limit_nclr_grd_rfp  "RFP"
!
!
! Dialog RFP_WIZ_MEAS_4D
!
rfp_wiz_4d_tag   "测量配置处理测试图"
rfp_wiz_4d_title  "测量配置处理测试图"
rfp_wiz_4d_hint   "处理打印机的配置"
rfp_wiz_4d_meas   "我想要测量配置处理测试图"
rfp_wiz_4d_no_meas  "我已经测量了配置处理测试图并想要立即加载测量文件"
!
!
! Dialog RFP_WIZ_MEAS_GRD 
!
rfp_wiz_meas_grd_tag "测量线性化测试图"
rfp_wiz_meas_grd_title "测量线性化测试图"
rfp_wiz_meas_grd_hint "要创建线性化数据，必须测量已打印的测试图。"
!
!
! Dialog RFP_WIZ_MEAS_NCLR_GRD
!
rfp_wiz_meas_mclr_grd_txt "您想要如何使用线性化测试图？"
rfp_wiz_meas_mclr_grd_ok "我已经测量了测试图并想要加载一份测量文件"
rfp_wiz_meas_mclr_grd_meas "我想要测量测试图"
!
!
! Dialog RFP_WIZ_PRI_4D 
!
rfp_wiz_pri_4d_tag  "选择配置处理测试图"
rfp_wiz_pri_4d_title "选择配置处理测试图"
rfp_wiz_pri_4d_hint  "选择一份测试图，以处理您的打印机配置。\n稍后将会打印此测试图。"
!
!   
! Dialog RFP_WIZ_PRI_GRD 
!
rfp_wiz_pri_grd_tag  "打印线性化测试图"
rfp_wiz_pri_grd_title "打印线性化测试图"
rfp_wiz_pri_grd_hint1 "要线性化您的打印机，您需要打印一份线性化测试图。"
rfp_wiz_pri_grd_hint2 "如果您正在使用的打印机配有内嵌的测量设备，请确保您已选择了正确的测试图。"
!
!
! Dialog SCATTERED_QUEUE 
!
title_scattered_queue "散拼打样管理器"
sq_queue_file  "队列文件"
sq_jobs   "作业已散拼"
sq_waiting  "作业正等待散拼"
sq_printed  "已打印作业"
sq_delete  "立即删除"
sq_auto_mode  "自动模式，无法进行手动干预"
sq_man_mode  "手动模式，单击绿色复选标记以打印所选项"
sq_scale		"比例"
! Tool Tips
sq_tt_prio_inc  "提高所选作业的优先级"
sq_tt_prio_dec  "减小所选作业的优先级"
sq_tt_delete  "删除所选作业"
sq_tt_tool_rotate "旋转作业"
sq_tt_tool_copy  "复制作业"
sq_tt_tool_add_coll "将作业添加到队列中"
sq_tt_tool_rem_coll "从队列中移除作业"
sq_tt_tool_crop  "裁切"
sq_tt_tool_delete "删除作业"
sq_tt_print_this "接收所选项并打印"
sq_tt_undo_layout "撤销所选项"
sq_tt_tool_scale "扩大所选项"
!
! Context menu
!
! Note to translators:
! The underscore may be placed before any letter within the menu items. 
! Only make sure that the following letter remains unique within the context menu.
!
sq_menu_rotate  "旋转"
sq_menu_remove  "从队列中移除"
sq_menu_add   "添加到队列中"
sq_menu_delete  "删除作业"
sq_menu_duplicate "复制作业"
sq_menu_crop  "裁切"
!
!
! Dialog SCATTERPROOF_SUBDIALOG_A 
!
title_sq_sub_a   "纸张使用情况"
sq_form_size   "散拼打样表单的大小"
sq_print_height   "连续纸张的可打印高度"
sq_reduce    "减少可打印区域"
sq_width    "宽度"
sq_height    "高度"
sq_hint     "此区域的覆盖率至少应达到"
sq_hint2    "达到此覆盖率后，将立即开始打印。"
!
!
! Dialog SCATTERPROOF_SUBDIALOG_B 
!
title_sq_sub_b   "过大的文档"
sq_ovsz_rot    "可以旋转文档"
sq_ovsz_scale   "可以缩小文档"
!
!
! Dialog SCATTERPROOF_SUBDIALOG_C 
!
title_sq_sub_c   "每个文档的额外信息"
sq_doc_name    "文档名称"
sq_doc_type    "文档类型"
sq_col_space   "颜色空间"
sq_dim_def    "尺寸（默认单位）"
sq_dim_mm    "尺寸（单位：毫米）"
sq_dim_cm    "尺寸（单位：厘米）"
sq_dim_inch    "尺寸（单位：英寸）"
sq_dim_pix    "尺寸（单位：像素）"
sq_res_def    "分辨率（默认单位）"
sq_res_lpmm    "分辨率（单位：lpmm）"
sq_res_lpcm    "分辨率（单位：lpcm）"
sq_res_dpi    "分辨率（单位：dpi）"
sq_date     "打印作业日期"
sq_time     "打印作业时间"
!
!
! Dialog SCATTERPROOF_SUBDIALOG_D 
!
title_sq_sub_d  "文档布局"
sq_layout   "散拼打样表单的文档"
sq_align   "对齐（可方便地切割文档，但占用更多空间。）"
sq_rot_across  "旋转页面以节省纸张"
sq_borders   "添加边界"
sq_spacing   "间距"
sq_doc_size   "页面大小"
!
!
! Dialog SELECT_PRINTER 
!
title_sel_printer "选择打印机" 
!
!
! Dialog SETTINGS 
!
title_settings "偏好"
!
!
! Dialog SETTINGS_ACC 
!
settings_acc_title  "校准 / 颜色匹配"
header_print_cal  "打印机校准"
keep_black    "保持纯黑"
keep_colors    "保持纯色"
sim_pap_white   "模拟纸白色"
header_spoco_corr_wiz "专色校正向导"
spoco_corr_wiz_text  "如果待优化的专色数量超过以下数字，则不打印额外的色标"
default_cal_test_chart "校准测试图"
!
!
! Dialog SETTINGS_ACC_MF 
!
set_acc_mf_title  "校准 / 颜色匹配"
set_acc_print_cal  "打印机校准"
set_acc_keep_black  "保持纯黑"
set_acc_keep_colors  "保持纯色"
set_acc_sim_white  "模拟纸白色"
set_acc_mf_iter   "迭代"
set_acc_criteria  "符合以下标准时，程序会显示出令人满意的结果："
set_acc_mf_aver_de		"Ø dE 优于"
set_acc_mf_max_de  "最大 Ø dE 优于"
set_acc_mf_max_dh  "最大 dH 一次色（最大值）"
set_acc_mf_dh_cmy		"Ø dH CMY 灰度"
set_acc_mf_def   "默认值"
set_acc_mf_max_dch  "Ø dCh CMY 灰色"
!
!
! Dialog SETTINGS_DATABASE 
!
title_set_db   "数据库"
set_dp_check   "检查并修复数据库"
set_dp_copy    "创建数据库备份副本"
set_db_backup   "备份"
set_db_task    "创建数据库备份任务"
set_db_recover   "恢复数据库备份副本"
!
!
! Dialog SETTINGS_DATABASE_BACKUP 
!
title_set_dp_backup   "安排数据库备份"
set_db_backup_activate  "激活数据库备份"
set_db_backup_start   "开始时间"
set_db_backup_daily   "每天"
set_db_backup_other   "其他"
set_db_backup_schedule  "已安排的数据库备份"
set_db_backup_start_now  "现在开始"
set_db_backup_dir   "备份目录"
set_db_backup_user   "由用户备份"
set_db_backup_pw   "密码"
set_db_backup_pw_confirm "密码确认"
set_db_backup_num_copies "要保存的备份副本数量"

!
! Common dialog names
!
set_weekday_all	"每天"
set_weekday_mon	"周一"
set_weekday_tue	"周二"
set_weekday_wed	"周三"
set_weekday_thu "周四"
set_weekday_fri "周五"
set_weekday_sat "周六"
set_weekday_sun	"周日"
!
!
! Dialog SETTINGS_EMAIL 
!
title_set_email   "电子邮件设置"
set_email_server  "SMTP 服务器"
set_email_port   "SMTP 端口"
set_email_user   "用户名"
set_email_pw   "密码"
set_email_address  "电子邮件地址"
!
!
! Dialog SETTINGS_EMBEDDED_MEASDEV
!
title_set_emb_measdev "内嵌的测量设备"
set_emb_measdev_epson "Epson SpectroProofer"

set_emb_measdev_air   "风干"
set_emb_measdev_time_min "干燥时间（分钟）"
set_emb_measdev_fan   "鼓风机"
set_emb_measdev_power  "风扇功率"
set_emb_measdev_response "响应状态"
set_emb_measdev_upside  "倒置测量测试图"
set_emb_measdev_film  "创建垂直式\n测试图（适用于胶片）"
set_emb_measdev_xrga_ils "使用 XRGA 标准（仅限 ILS20）"
set_emb_measdev_hp   "HP Designjet Z 系列"
set_emb_measdev_time_sec "干燥时间（秒）"
set_emb_meas_mode_ils  "测量模式（仅限 ILS30）"
set_emb_meas_mode   "测量模式"
set_emb_meas_mode_m0  "M0（无过滤器）"  
set_emb_meas_mode_m1  "M1"
set_emb_meas_mode_m2  "M2/UV-cut 过滤器"
!
set_emb_measdev_canon  "Canon iPF 分光光度计"
set_emb_measdev_no_dry  "无干燥"
set_emb_measdev_max_time "最大 干燥时间"
set_emb_measdev_fan_pos  "风扇位置" 
set_emb_measdev_low   "低"
set_emb_measdev_high  "高"
set_emb_measdev_uvcut  "UV-cut 过滤器"
!
!
! Dialog SETTINGS_ESKO
!
settings_esko_title  "Esko"
settings_esko_path  "Esko Color Database 的路径 (bg_data_cms_v010)"
settings_esko_get_env "从环境获得"
settings_esko_server "Esko License Server（服务器名称或本机）"
!
!
! Dialog SETTINGS_ICC
!
d_formula  "Delta E 方程式"
header_mon_prof "监视器配置文件"
use_sys_prof "使用系统监视器配置文件"
cmm_to_use  "下一个程序开始时使用的 CMM"
!
!
! Dialogs SETTINGS_LOG and FA_LP_SETTINGS_LOG
!
title_settings_log "日志"
set_log_file  "日志文件"
set_log_use_ct  "使用程序日志文件"
set_log_editor  "用于查看日志文件的文本编辑器"
set_log_intact  "Log Hotfolder Manager 交互式调用"
set_log_batch  "Log Hotfolder Manager 批处理命令调用"
!
set_log_oem_send "将打印打样的 RIP/打印机状态发送到 Colorpath Verified"
set_log_oem_ask_ip "将用于测量打印打样的计算机（IP 地址或者计算机名称，'本机'是指该计算机）"
!
!
! Dialogs SETTINGS_MEASDEV, SETTINGS_MEASDEV_BIG,
!    SETTINGS_MEASDEV_WIZARD and RECAL_WIZ_SETTINGS_MEASDEV
!
title_set_measdev  "测量设备设置"
set_measdev_instr  "设备"
set_measdev_prop  "属性..."
set_measdev_port  "端口"
set_measdev_geo   "色标的几何形状..."
set_measdev_baud  "数据速率（波特）"
set_measdev_test  "测试"
measdev_tcpip_address "</Z2>"
measdev_tcpip_port  "IP 端口" 
set_measdev_mode  "测量方法"
set_measdev_refl  "反射"
set_measdev_trans  "传播"
set_measdev_abort  "中止"
set_measdev_strips  "测量色带"
set_measdev_patches  "测量单一色标"
!
!
! Dialog SETTINGS_MEASDEV_PP 
!
measdev_title  "测量设备设置"
port    "端口"
instrument   "设备"
baud_rate   "数据速率\n（波特）"
inst_prop_button "属性..."
col_patch_geo  "色标的几何形状..."
test_button   "测试"
abort_button  "中止"
meas_mode   "测量\n模式"
reflection   "反射"
transmission  "传播"
!
!
! Dialog SETTINGS_WF_WAITING_TIME 
!
title_set_wf_time "监视文件夹"
set_wf_time_wait "等候时间"
set_wf_time_folders "监视文件夹的等候时间"
set_wf_time_seconds "秒"
!
!
! Dialog MF_ACC_OPT_ACT_ADV
!
mf_acc_opt_act_related_cal "相关的打印机校准文件"
mf_acc_opt_act_adv_stab  "稳定器"
mf_acc_opt_act_adv_start_pt "起始点"
mf_acc_opt_act_adv_b_width "黑色宽度"
acc_opt_acm_rgb_cmy_sep  "RGB-CMYK 分色"
!
!
! Dialog SETUP_WIZ_EXTERNAL_MEASDEV
!
title_SETUP_WIZ_EXTERNAL_MEASDEV "测量设备"
setup_wiz_ext_more     "更多..."
!
!
! Dialog SETUP_WIZ_SELECT_PRINT_METHOD
!
title_SETUP_WIZ_SELECT_PRINT_METHOD "选择打印方法"
setup_wiz_select_pm_intro   "请选择打印方法："
setup_wiz_select_pm_ct    "连续色调（来自 CT 数据的打样）"
setup_wiz_select_pm_sd    "!{OEM_SD}（来自半色调数据的半色调网点打样）"
setup_wiz_select_pm_sdp    "!{OEM_SD_Plus}（来自 CT 数据的半色调网点打样）"
setup_wiz_select_pm_note   "打样半色调数据时请注意以下事项："
setup_wiz_select_pm_note1   "需要已加网的测试图和根据这些图表创建的特殊 RFP 文件。"
setup_wiz_select_pm_note2   "如果添加了颜色条，请使用采用与输入数据相同的设置而加网的 1 位文件。"
setup_wiz_select_pm_note3   "如果半色调网点打样是根据 CT 数据创建而成，那么颜色条也应该是 CT 文件。"
!
! 
! Dialog SETUP_WIZ_ACC_OPT_ACM 
! and  SETUP_WIZ_ACC_OPT_ACM_ADV 
!
title_SETUP_WIZ_ACC_OPT_ACM  "PS 打印机迭代颜色匹配"
acc_opt_acm_cal_file   "相关的打印机校准文件"
setup_wiz_acc_opt_acm_target "目标 ICC 配置文件或测量文件"
setup_wiz_acc_opt_acm_measure "测量..."
setup_wiz_acc_opt_acm_chart  "测试图"
setup_wiz_acc_opt_acm_k_sep  "黑色分色"
setup_wiz_acc_opt_acm_keep_k "保持纯黑"
setup_wiz_acc_opt_acm_keep_k100 "保持 K100"
setup_wiz_acc_opt_acm_keep_prim "保持一次色"
!
setup_wiz_acc_opt_acm_stab  "稳定器"
setup_wiz_acc_opt_acm_start_pt "起始点"
setup_wiz_acc_opt_acm_tic  "预期油墨 \n总覆盖率"
setup_wiz_acc_opt_acm_rgb_cmyk "RGB-CMYK 分色"
setup_wiz_acc_opt_acm_black_sep "黑色分色"
!
!
! Dialog SETUP_WIZ_BLACK_MODE 
!
title_SETUP_WIZ_BLACK_MODE  "颜色模式"
setup_wiz_black_mode_info  "使用此参数以选择打印机的颜色模式。"
setup_wiz_black_mode_color_mode "颜色模式"
!
!
! Dialog SETUP_WIZ_CAL_RFP 
!
!
title_SETUP_WIZ_CAL_RFP  "参考打印机配置文件"
!
setup_wiz_cal_rfp_info1  "您是否想要根据参考打印机配置文件 (RFP) 来校准您的打印机？"
setup_wiz_cal_rfp_info2  "参考打印机配置文件相当于一台主打印机，其中包含了线性化的目标密度和油墨限制信息。"
setup_wiz_cal_rfp_info3  "如果您只是使用现有的校准文件创建新的颜色匹配，请选择“否”。"
setup_wiz_cal_rfp_yes  "是，我希望使用参考打印机配置文件"
setup_wiz_cal_rfp_no  "否，我不希望使用参考打印机配置文件"
!
!
! Dialog SETUP_WIZ_COLCORR 
!
title_SETUP_WIZ_COLCORR  "颜色校正"
setup_wiz_colcorr_info		"选择用于对您的输出进行颜色匹配的方法。 您可以使用 ICC 配置文件或 !{OEM_ORIS__DAT} 颜色表。"
setup_wiz_colcorr_none  "无/未定义"
setup_wiz_colcorr_icc  "ICC"
setup_wiz_colcorr_col_table "!{OEM_ORIS__DAT} 颜色表"
setup_wiz_colcorr_new_icc "根据 ICC 配置文件生成颜色表..."
setup_wiz_colcorr_new_auto "通过自动色彩匹配 生成颜色表"
!
!
! Dalog SETUP_WIZ_COLCORR_CHART 
!
title_SETUP_WIZ_COLCORR_CHART "颜色校正 - 测试图"
setup_wiz_colcorr_chart_info1  "选择一个测试图，为您的打样打印机创建一个 ICC 配置文件。 该配置文件将会自动打印。 标准化的测试图包括有 IT8/7.3 或 ECI2002。"
setup_wiz_colcorr_chart_info2 "为不同的测试设备和配置处理工具提供各种测试图变体。"
!
!
! Dialog SETUP_WIZ_COLCORR_ICC 
!
title_SETUP_WIZ_COLCORR_ICC    "颜色校正 - 选择 ICC 配置文件"
setup_wiz_colcorr_icc_doc_col_space  "文档颜色空间"
setup_wiz_colcorr_icc_info1    "PDF/X 文件：始终使用内嵌的配置文件并与输出意向匹配。"
setup_wiz_colcorr_icc_info2    "其他文档："
setup_wiz_colcorr_icc_use_profiles  "使用内嵌的配置文件（如果有），否则使用以下默认配置文件："
setup_wiz_colcorr_icc_rgb    "RGB 配置文件"
setup_wiz_colcorr_icc_hex    "高保真六色、GOP、\nN 通道、高保真色彩"
setup_wiz_colcorr_icc_target_col_space "目标颜色空间"
setup_wiz_colcorr_icc_info3    "PDF/X 文件：使用输出意向（如果有），否则使用以下配置文件："
setup_wiz_colcorr_icc_cmyk    "CMYK 配置文件"
setup_wiz_colcorr_icc_dev_col_space  "设备颜色空间"
setup_wiz_colcorr_icc_proof    "打样配置文件"
!
!
! Dialog SETUP_WIZ_COLCORR_PMW 
!
title_SETUP_WIZ_COLCORR_PMW  "颜色校正"
setup_wiz_colcorr_pmw_info		"选择用于对您的输出进行颜色匹配的方法。"
setup_wiz_colcorr_pmw_col_table  "!{OEM_ORIS__DAT} 颜色表"
setup_wiz_colcorr_xgamut			"X GAMUT\n（使用多通道 ICC 输出配置文件的扩展色域）"
setup_wiz_colcorr_pmw_iter   "迭代颜色匹配\n（专利，极准确）"
setup_wiz_colcorr_pmw_wide_gammut "迭代宽色域颜色匹配\n（使用中性灰平衡实现最优 RGB 颜色）"
!
!
! Dialog SETUP_WIZ_COLCORR_PRI 
!
title_SETUP_WIZ_COLCORR_PRI "颜色校正 - 打印测试图"
setup_wiz_colcorr_pri_info "单击“下一步”以打印颜色校正测试图。"
!
!
!  Dialog SETUP_WIZ_COMPL 
!
title_SETUP_WIZ_COMPL "设置向导"
setup_wiz_compl_grat "恭喜！"
setup_wiz_compl_success "已成功建立队列。\n \n"
!
!
! Dialog SETUP_WIZ_CAL_DE 
!
title_SETUP_WIZ_CAL_DE "Delta E 方程式"
setup_wiz_cal_de	"请选择一个 Delta E 方程式。 此方程式用于迭代打印机校准和迭代颜色匹配。 始终为整个颜色管理进程使用相同的方程式。"
!
!
! Dialog SETUP_WIZ_DOTPROOF 
!
title_SETUP_WIZ_DOTPROOF "网点打样设置"
setup_wiz_dotproof_res  "网点打样分辨率"
setup_wiz_dotproof_angles "网屏角度"
setup_wiz_dotproof_spot1 "专色 1"
setup_wiz_dotproof_spot2 "专色 2"
setup_wiz_dotproof_spot3 "专色 3"
setup_wiz_dotproof_spot4 "专色 4"
setup_wiz_dotproof_degrees	"+ 7,5°"
setup_wiz_dotproof_def  "默认"
!
!
! Dialog SETUP_WIZ_EMBEDDED_MD
!
title_SETUP_WIZ_EMBEDDED_MD  "分光光度计"
setup_wiz_embedded_md_info  "此打印机有一个内嵌的分光光度计。"
setup_wiz_embedded_md_cl_mode "我想要使用内嵌的分光光度计进行测量\n（闭环模式）"
setup_wiz_embedded_md_ext  "我希望使用外部分光光度计进行测量"
setup_wiz_embedded_md_note  "注意：内嵌的分光光度计只适用于纸张打样输出。 我们建议使用外部测量设备进行胶片打样输出。"
!
!
! Dialog SETUP_WIZ_ERR 
!
 title_SETUP_WIZ_ERR  "设置向导"
 setup_wiz_err_msg   "没有安装打印机！"
 setup_wiz_err_hint   "请确保使用打印机制造商提供的原装驱动程序安装打印机。"
!
!
! Dialog SETUP_WIZ_FIRMWARE 
!
title_SETUP_WIZ_FIRMWARE "固件版本"
setup_wiz_firmware_info  "选择您的打印机的固件版本。"
setup_wiz_firmware_version "固件版本"
!
!
! Dialog SETUP_WIZ_IMAGEOUT 
!
title_SETUP_WIZ_IMAGEOUT "打印至文件"
setup_wiz_imageout_dir  "输出目录"
setup_wiz_imageout_res  "分辨率"
setup_wiz_imageout_comp  "压缩"
!
!
! Dialog SETUP_WIZ_LIN 
!
title_SETUP_WIZ_LIN   "线性化 - 校准"
setup_wiz_lin_info1   "要线性化打印机，请选择一个现有的线性化文件 (*.LIN)，或者创建一个新的线性化文件。"
setup_wiz_lin_info2   "如果您不打算线性化或校准打印机，请选择“无”。"
setup_wiz_lin_info3   "如果您最近曾线性化打印机，请选择“现有线性化文件”， 然后便可以校准打印机。"
setup_wiz_lin_info4   "如果您想要立即线性化打印机，请选择“新线性化”，  然后便可以校准打印机。 建议按照此程序操作。"
setup_wiz_lin_info5   "如果最近曾校准打印机，请选择“现有校准文件”。"
setup_wiz_lin_none   "无"
setup_wiz_lin_existing  "现有线性化文件"
setup_wiz_lin_new   "新线性化"
setup_wiz_colcorr_calib  "现有校准文件"
!
!
! Dialogs SETUP_WIZ_LIN_CHART and RECAL_WIZ_LIN_CHART 
!
title_RECAL_WIZ_LIN_CHART "线性化测试图"
setup_wiz_lin_chart_choose "请选择线性化测试图的屏蔽 1 位 Tiff 文件， 以用于所选测量设备。"
setup_wiz_lin_chart_def  "安装目录“Testcharts”文件夹中提供了非屏蔽的标准测试图。 \ n 每个测量设备都有一个单独的子文件夹。 X-Rite i1 的线性化测试图在 “Testcharts” 文件夹中。\n\n 线性化测试图可以通过文件名“Color 21 Step ...”识别。 \n使用XG INKS 打印的 6 通道测试图其文件名包含字符'6clr'。"
setup_wiz_samples   "例子：" 
setup_wiz_sample_i1iO  "使用 i1 iO进行测量的 4 通道线性化测试图"
setup_wiz_sample_i1iSis  "使用 i1 iSis 进行测量的 6 通道线性化测试图"
!
!
! Dialogs SETUP_WIZ_LIN_ITER
!    RECAL_WIZ_LIN_ITER 
!
title_SETUP_WIZ_LIN_ITER "优化线性化"
setup_wiz_lin_iter_info  "您可以通过进行额外的测量，以优化线性化。\n建议进行两次测量。"
setup_wiz_lin_iter_back  "<后退>"
setup_wiz_lin_iter_back_txt "- 我想要通过额外的测量以优化线性化\n并重新打印线性化测试图"
setup_wiz_lin_iter_next  "<下一步>"
setup_wiz_lin_iter_next_txt "- 我想要完成线性化进程"
!
!
! Dialogs SETUP_WIZ_LIN_MEAS
!    RECAL_WIZ_LIN_MEAS
!
title_SETUP_WIZ_LIN_MEAS "测量线性化测试图"
setup_wiz_lin_meas_info  "在下一步中，必须测量已打印的测试图，才能够创建线性化数据。"
!
!
! Dialogs SETUP_WIZ_LIN_PRI
!    RECAL_WIZ_LIN_PRI
!
title_SETUP_WIZ_LIN_PRI  "打印线性化测试图"
setup_wiz_lin_pri_info  "单击“下一步”以打印线性化测试图。"
setup_wiz_lin_pri_copies "副本"
recal_wiz_white_lin   "更改白色线性化"
recal_wiz_silver_lin  "更改银色线性化"
!
!
! Dialog SETUP_WIZ_MULTIPASS
!
title_SETUP_WIZ_MULTIPASS  "多次打印"
title_setup_wiz_multipass_sequ "多次打印序列"
setup_wiz_multpass_colors  "颜色"
setup_wiz_multpass_ovp   "叠印"
setup_wiz_multpass_varnish  "上光模式"
setup_wiz_multpass_pass1		"1. 通道"
setup_wiz_multpass_pass2		"2. 通道"
setup_wiz_multpass_pass3		"3. 通道"
!
!
! Dialog SETUP_WIZ_PA_FORMAT 
!
title_SETUP_WIZ_PA_FORMAT "纸张大小"
setup_wiz_pa_format_info "选择用于打印的纸张的大小、纸张来源和\n输出纸盘。"
setup_wiz_pa_format_tray "纸张来源"
setup_wiz_pa_format_width "宽度"
setup_wiz_pa_format_size "纸张大小"
setup_wiz_pa_format_height "高度"
setup_wiz_pa_format_output "出纸盘"
setup_wiz_pa_format_cut  "自动切割"
!
!
! Dialog SETUP_WIZ_PA_SAVE 
!
title_SETUP_WIZ_PA_SAVE  "节省卷筒纸"
setup_wiz_pa_save_info1  "使用大幅面打印机和卷筒纸时，您应该启用打印机驱动程序的纸张节省选项，并禁用以下参数，以便在文档打印后直接切断纸张。"
setup_wiz_pa_save_info2  "只有在打印机驱动程序不提供此选项，或此功能运作不正常时，您才应该启用以下纸张节省选项并禁用打印机驱动程序的选项。"
setup_wiz_pa_save_save  "节省卷筒纸"
!
!
! Dialog SETUP_WIZ_PA_TYPE 
!
title_SETUP_WIZ_PA_TYPE  "纸张类型"
setup_wiz_pa_type_info  "组合选择纸张类型、分辨率、质量和打印模式。"
setup_wiz_pa_type_paper  "纸张类型"
setup_wiz_pa_type_res  "分辨率"
setup_wiz_pa_type_qual  "质量"
setup_wiz_pa_type_mode  "打印模式"
!
!
! Dialog SETUP_WIZ_PR_ADJUST_CT6
!
title_SETUP_WIZ_PR_ADJUST_CT6  "调整和大小"
setup_wiz_pr_adjust_info			"您可以指定文档按照其原始大小和方向打印，或者在超过打印机的最大输出格式时，自动缩放或旋转。 您还可以指定固定的缩放系数。"
setup_wiz_pr_adjust_orig   "原始大小和方向"
setup_wiz_pr_adjust_auto_scale  "自动缩放"
setup_wiz_pr_adjust_auto_rot  "自动旋转"
setup_wiz_pr_adjust_auto_mirror  "翻转"
setup_wiz_pr_adjust_auto_center  "自动居中"
setup_wiz_pr_adjust_scale			"比例"
setup_wiz_pr_adjust_scale_x   "缩放系数 X"
setup_wiz_pr_adjust_scale_y   "缩放系数 Y"
pr_adjust_shrink_paper    "收缩至纸张大小"
pr_adjust_scale_paper    "缩放至纸张大小"
pr_adjust_factor     "系数"
setup_wiz_pr_adjust_prop   "保持比例"
setup_wiz_pr_adjust_orie   "方向"
!
!
! Dialog SETUP_WIZ_PR_ADJUST_USER
!
title_SETUP_WIZ_PR_ADJUST_USER  "用户定义的布局调整"
setup_wiz_pr_adjust_user_info  "请输入要应用至所有打印输出的缩放系数和方向。"
!
!
! IDialog SETUP_WIZ_PR_BLEED 
!
title_SETUP_WIZ_PR_BLEED  "额外信息"
setup_wiz_pr_bleed_info			"您可以指定是否在每个打印输出上打印标题。 请在以下方框中输入标题文本。"
setup_wiz_pr_bleed_print_info "标题"
setup_wiz_pr_bleed_info2		"您可以指定是否在每个打印输出上打印颜色条。 请在以下方框中输入颜色条文件的完整路径名称，或单击?浏览..."
setup_wiz_pr_bleed_bar   "颜色条"
setup_wiz_pr_bleed_info3		"您可以指定是否在每个打印输出上打印客户标识。 请在以下方框中输入标识文件的完整路径名称，或单击?浏览..."
setup_wiz_pr_bleed_logo   "客户标识"
!
!
! Dialog SETUP_WIZ_PR_DP_ADJUST_CT6
!
title_SETUP_WIZ_PR_DP_ADJUST_CT6 "布局调整"
setup_wiz_pr_dp_adjust_info1  "您可以选择文档的方向，或指定在超过打印机最大输出格式时，是否自动旋转。"
setup_wiz_pr_dp_adjust_info2  "对于自动旋转，请激活带有 'A' 标记的按钮。"
! 
! All other text from dialog PR_ADJUST
!
!
! Dialog SETUP_WIZ_PRI_DEV 
!
title_SETUP_WIZ_PRI_DEV   "打印机选择"
setup_wiz_pri_dev_info   "请为这些打印机预设指定一个名称。"
setup_wiz_pri_dev_preset_name "打印机预设名称"
setup_wiz_pri_dev_info2			"选择您想要用于打印的打印机。 列表包含您系统上所有已安装的打印机。"
setup_wiz_pri_dev_printer_name "打印机"
!
!
! Dialogs SETUP_WIZ_PRI_SELECT and MF_SETUP_WIZ_PRI_SELECT
!
title_SETUP_WIZ_PRI_SELECT   "打印机选择"
setup_wiz_pri_select_info   "请为新的 COLOR TUNER 队列选择一台打印机"
setup_wiz_pri_select_printer  "打印机"
setup_wiz_pri_select_printer_name "打印机名称"
setup_wiz_pri_select_queues   "现有队列"
setup_wiz_pri_select_new_queue  "新队列"
setup_wiz_pri_select_wf    "监视文件夹"
setup_wiz_pri_select_create_vp  "创建虚拟打印机"
!
mf_setup_wiz_pri_select_info  "请为新的输出队列输入一个名称"
!
!
! Dialog SETUP_WIZ_PS_OUTPUT 
!
title_SETUP_WIZ_PS_OUTPUT "以 PostScript 格式输出"
setup_wiz_ps_output_info1 "启用此选项，直接在 PostScript 打印机上输出 PostScript 文档。"
setup_wiz_ps_output_info2	"ORIS 程序只会进行颜色校正，并保留 PostScript 文件中存储的所有打印设置（方向、缩放等）。 这表示它将会应用设置"
setup_wiz_ps_output_ps_out "以 PostScript 格式输出"
!
!
! Dialog SETUP_WIZ_PSP
!
title_SETUP_WIZ_PSP "PostScript/PDF 选项"
setup_wiz_psp_info "指定参数以解析 PDF 和 PostScript 文件。"
pr_page_appe  "使用 PDF 打印引擎处理 PDF 文件"
setup_wiz_psp_note "注意：图像插值和锐化、页面大小定义、重合失调、OPI、印前参数、轮廓切割和高级 PS/PDF 参数均不适用于 Adobe 打印引擎。 此外，如果不使用超采样，则抗锯齿仅限于文本元素。"
pr_page_sel_size "定义页面大小和偏移量"
pr_page_user  "用户定义"
pr_page_media  "PostScript/PDF 媒体框"
pr_page_crop  "PostScript/PDF 裁切框"
pr_page_trim  "PostScript/PDF 修剪框"
pr_page_bleed  "PostScript/PDF 出血框"
pr_page_gross  "总大小（包括 裁切标记）"
pr_page_net   "净大小（不包括裁切标记）"
pr_page_bb   "页面内容的限位框"
pr_page_keep  "保持当前布局大小"
pr_page_keep_spot "保持图像专色分色"
pr_page_x   "页面大小 X"
pr_page_use_ovp  "使用叠印命令"
pr_page_y   "页面大小 Y"
pr_page_off_x  "页面偏移 X"
pr_page_off_y  "页面偏移 Y"
!
!
! Dialog SETUP_WIZ_ROLAND
! 
title_SETUP_WIZ_ROLAND "Roland 打印机设置"
setup_wiz_roland_speed "打印头速度"
setup_wiz_roland_mm  "毫米/秒"
!
!
! Dialog SETUP_WIZ_WHITE_MODE 
!
title_SETUP_WIZ_WHITE_MODE "白色油墨"
setup_wiz_white_info  "要用白色油墨打印什么内容？"
setup_wiz_white_background "整个页面的白色背景"
setup_wiz_white_cover  "油墨覆盖率 (0...100%)"
setup_wiz_white_sep   "白色分色（专色）"
setup_wiz_white_col_names "颜色名称..."
setup_wiz_white_duty  "白色油墨不透明度"
!
!
! Dialog SETUP_WIZ_SILVER_MODE 
!
title_SETUP_WIZ_Silver_MODE "金属色油墨"
setup_wiz_silver_info  "要用金属色油墨打印什么内容？"
setup_wiz_silver_sep  "金属色分色（专色）"
setup_wiz_silver_col_names "颜色名称..."
setup_wiz_silver_duty  "金属色油墨不透明度"
!
!
! Dialog SPOCO_SUBSTITUTE 
!
title_spoco_subst "颜色替换"
spoco_subst_proc "替换印刷色"
spoco_subst_spot "替换专色" 
spoco_subst_corr "专色\n校正文件："
!
!
! Dialog MODIFICATION_EDIT 
!
title_spoco_mod_edit  "修改专色"
spoco_mod_edit_spoco  "专色"
spoco_mod_edit_mod   "修改"
spoco_mod_edit_repl   "替换"
spoco_mod_edit_new   "新颜色"
spoco_mod_edit_omit   "忽略"
title_color_mod_edit  "修改颜色"
color_mod_edit_source  "源"
color_mod_edit_src_spoco "从专色"
color_mod_edit_spoco  "专色"
color_mod_edit_src_process "从印刷色"
color_mod_edit_process  "印刷色"
color_mod_edit_mod   "修改"
color_mod_edit_target_spoco "到专色"
color_mod_edit_target_process "到印刷色"
color_mod_edit_omit   "忽略"
!
!
! Dialog SPOCO_VISUAL
!
title_spoco_visual  "视觉专色优化"
spoco_vis_spoco   "专色"
lab      "Lab"
spoco_vis_devcol  "设备颜色"
spoco_vis_dir   "方向"
spoco_vis_col   "颜色"
spoco_vis_tint   "着色步骤"
spoco_vis_size   "页面大小"
spoco_vis_shell   "外壳程序数目"
display_clipped_color "显示被剪辑"
patch_outline   "色标概况" 
tints_even_spaced  "相同的色彩梯级"
selected_color   "所选颜色"
!
!
! SPOCO_WIZ_EVAL
! (Same text as ACC_WIZ_EVAL)
!
! Dialog SPOCO_WIZ_PRI
!
title_SPOCO_WIZ_PRI  "打印测试图"
spoco_wiz_pri_info  "单击 <下一步> 以打印和测量专色测试图。"
!
! Dialog SPOCO_WIZ_PROP_SHEET 
! (No particular text)
!
! Dialog SPOCO_WIZ_SELECT
!
title_SPOCO_WIZ_SELECT  "选择专色"
setup_wiz_select_spoco_sel "选择您要校正的专色。"
!
!
! Dialog SPOCO_WIZ_SETTINGS_MEASDEV 
! (Same text as RECAL_WIZ_SETTINGS_MEASDEV)
!
!
! Dialog SPOCO_WIZ_WHITE_MODE 
!
title_SPOCO_WIZ_WHITE_MODE "白色油墨"
spoco_wiz_white_mode_bg  "整个页面的白色背景"
!
!
! Dialogs SPOT_IMPORT
!    SPOT_IMPORT_SNGL
!
title_spoco_import  "导入专色"
spoco_name    "名称"
spoco_file    "文件" 
spoco_profile   "打样配置文件"
spoco_comment   "备注"
spoco_num_select  "0 已选"
spoco_search   "搜索"
spoco_use_silver  "使用银色通道"
spoco_silver_cover  "油墨覆盖率 (0...100%)"
spoco_use_white   "使用白色通道"
spoco_sel_all_button "全选"
spoco_imp_sel_button "导入所选项"
!
spoco_info    "信息"
!
!
! Dialogs SPOT_IMPORT_PL
!
title_spoco_pl_import "导入 PantoneLIVE™ 专色"
spoco_pl_account_name "用户名"
spoco_pl_password  "密码"
spoco_pl_server_url  "PantoneLIVE™ 服务器"
spoco_pl_activate  "激活"
spoco_pl_connect  "连接"
spoco_pl_use_proxy  "代理设置"
spoco_pl_proxy_addr  "HTTP 代理"
spoco_pl_proxy_port  "端口"
!
!
! Dialogs PL_ACCOUNT_ACTIVATION
!
title_pl_activation  "PantoneLIVE™ 许可证激活"
pl_activation_desc  "此处激活 PantoneLIVE™ 许可证"
pl_activation_code_input "激活码"
pl_activation_ok_button "激活"
!
!
! Dialogs PL_LOGIN
!
title_spoco_import_pl "PantoneLIVE™ 连接"
!
!
! Dialogs (MF_)SPOT_INPUT, PW_INPUT
!
title_spot_input  "手动专色输入"
spot_col_name   "颜色名称"
spot_tone_values  "色调值 (%)"
spot_opacity   "不透明度 (%)"
spot_print_order  "打印顺序"
po5_over    "5. 种颜色在 CMYK 之上"
po4_over    "4. 种颜色在 CMYK 之上"
po3_over    "3. 种颜色在 CMYK 之上"
po2_over    "2. 种颜色在 CMYK 之上"
po1_over    "1. 种颜色在 CMYK 之上"
po_cmyk     "CMYK"
po5_under    "5. 种颜色在 CMYK 之下"
po4_under    "4. 种颜色在 CMYK 之下"
po3_under    "3. 种颜色在 CMYK 之下"
po2_under    "2. 种颜色在 CMYK 之下"
po1_under    "1. 种颜色在 CMYK 之下"
spot_auto_add   "自动添加"
spot_ok_less   "确定，<"
spot_ok_greater   "确定，>"
spot_tolerances   "公差"
spot_strict    "严格"
spot_standard   "标准"
spot_hdr_lab_values  "Lab 颜色"
spot_lab_l    "L："
spot_lab_a    "a："
spot_lab_b    "b："
spot_dev_col   "原始设备颜色"
spot_hdr_cmyk_values "设备颜色"
spot_c     "C："
spot_m     "M："
spot_y     "Y："
spot_k     "K："
spot_or     "或者：</Z1>"
spot_gr     "Gr："
spot_vi     "Vi："
spot_eight    "8th"
spot_wh     "Wh："
spot_mt     "Mt："
spot_select    "选择..."
spot_meas_dev   "测量设备"
spot_select_button  "选择设备..."
spot_start_meas_button "开始测量"
spot_opt_button   "优化"
spot_opt_vis_button  "视觉上优化"
spot_smooth_button  "平滑"
spot_reset_button  "重设"
!
title_pw_input   "纸白色输入"
pw_input_hint   "测量或输入新纸张库的 Lab 值。"
!
nsc_edit_val "修改"
!
!
! Dialog STATUS_DIALOG 
!
title_status   "状态" 
!
!
! Dialog TEST_CMYK_API 
!
title_test_cmyk_api  "CMYK API 检查"
test_api_printer  "打印机"
test_api_available  "CMYK API 可用"
test_api_extended  "扩展的 GDI"
test_api_driver   "CMYK 驱动程序"
!
!
! Dialog TESTCHART_TO_REF 
!
title_testchart_to_ref "根据测试图创建参考文件"
tc_to_ref_chart   "CMYK 测试图"
tc_to_ref_size   "图表大小 - 色标数量"
tc_to_ref_flip_y  "Y 镜像"
tc_to_ref_flip_x  "X 镜像"
tc_to_ref_out_ref  "输出参考文件"
!
!
! Dialog TI_MAKESKILLS_DLG
! 
!
title_makeskills  "Technoin - 技能和油墨限制"
ti_skills_set   "设置"
ti_skills_pri   "打印机"
ti_skills_res   "分辨率"
ti_skills_col_mode  "颜色模式"
ti_skills_paper   "纸张"
ti_skills_skills  "1. Skill"
ti_skills_print_chart "打印 skill 图表"
ti_skills_meas_chart "衡量 skill 图表"
ti_skills_create_skills "通过测量创建 skill"
ti_skills_limits  "2. 油墨限制"
!
!
! Dialog TI_PRINTERCONF_DLG
! 
ti_skills_create_cur "为当前设置创建 skill 和油墨限制："
ti_skills_ink_button "Skill/油墨限制" 
!
! Dialog TIMETRIGGERED_CALIB_DLG 
!
!
! Dialog TIMETRIGGERED_CALIB_DLG 
!
time_trig_schedule  "时间表"
title_time_trig_calib "校准时间表"
time_trig_time   "时间"
time_trig_daily   "每天"
time_trig_day   "星期"
time_trig_weekly  "每周"
time_trig_day_of_month "日期"
time_trig_monthly  "每月"
time_trig_date   "日期"
time_trig_user   "用户定义"
time_trig_lin   "线性化"
time_trig_lin_pri  "线性化打印机" 
time_trig_express  "使用 RFP 文件中的线性化数据（极速校准）" 
time_trig_stop   "校准 - 停止标准"
time_trig_max_iter  "最大迭代数量"
time_trig_aver_de  "平均 dE 优于"
time_trig_max_de  "最大 dE 优于"
time_trig_monday  "星期一"
time_trig_tuesday  "星期二"
time_trig_wednesday  "星期三"
time_trig_thursday  "星期四"
time_trig_friday  "星期五"
time_trig_saturday  "星期六"
time_trig_sunday  "星期日"
!
! Dialog WATCHED_FOLDERS 
!
title_watched_folders "监视文件夹"
wf_add_folder   "添加文件夹..."
wf_rem_folder   "移除文件夹"
wf_settings    "打印机设置"
wf_check    "检查监视文件夹，每隔"
wf_seconds    "秒"
!
!
! Dialog WATCHED_FOLDERS_JOBS 
!
title_watched_folders_jobs "监视文件夹：作业"
wf_pause     "暂停"
wf_cancel     "取消作业"
!
!
! Dialog TELL_DEMO
!
title_lic_info   "许可信息"
lic_info_text   "未为 !{OEM_CT_Web} 找到有效的许可。"
lic_info_license_button "获取许可"
lic_info_demo_button "演示版信息"
!
!
! Dialog SPOCO_SAVE
!
title_spoco_save  "保存专色"
spoco_title    "标题"
spoco_copyright			"版权所有"
!
!
! Dialogs (DE)ACTIVATE_LICENSE
!
cxf_act_lic_title  "许可证激活"
cxf_act_lic_enter  "输入许可证密钥" 
cxf_act_lic_contact  "正在联系激活服务器..."
cxf_act_lic_acti_lic "激活许可证"
!
cxf_deact_lic_title  "停用许可证"
!
!
! Dialogs SPOT_RENAME, SPOT_DUPLICATE
!
title_spot_rename  "重命名专色"
spot_ren_txt   "请为专色输入新名称"
title_spot_duplicate "复制专色"
spot_dupl_txt   "请为复制的旧专色输入名称"
spot_ren_dupl_new  "新专色名称"
title_spot_more_settings	"专色文件 - 其他设置"
!
!
! Dialog SPOT_GRD 
!
title_spoco_corr  "专色校正"
file     "文件"
upload_in_menu_bar			"上传"
proof_profile   "设备配置文件"
comment     "备注"
num_sel     "0/0 已选" 
og_ref_button   "创建 MC 参考"
header_tolerances  "公差"
tol_strict    "严格"
tol_standard   "标准"
grd_spoco_search  "搜索"
grd_spoco_imp_cxfc  "导入 CxF "
grd_spoco_imp_scgx		"导入 SCGX  "
grd_spoco_imp_pl  "导入 PantoneLIVE™"
grd_spoco_ovp   "叠印"
grd_spoco_calc   "计算" 
header_single_spoco  "专色"  
spoco_dotgain_button "网点增益" 
spoco_grad_button  "渐变..." 
spoco_grad_del_dot_gain "删除网点增益"
spoco_corr_crea_cxf  "创建 CxF/X-4 色标"
selected_spocos			"选定的专色"
header_all_spocos  "所有专色"
corr_wiz_button   "迭代优化" 
opt_all_button   "优化"
reset_all_button  "重设" 
spoco_save_as_button "另存为..."
spot_more_settings	"其他设置"
!
spot_grd_new   "新建专色"
spot_grd_opt_all  "优化所有......"
spoco_exclude_ch  "不包括通道组合" 
spot_grd_reset_all  "重置所有"
!
spoco_adapt_pw_button	"适应打样纸白色..."
title_spoco_scgx_upload	"上传 SCGX 到 !{oem_cxf_cloud}"
spoco_scgx_server_url	"!{oem_cxf_cloud} 服务器"
!
grd_spoco_del_sel		"删除所选" 
!
!
! SPOT_GRD Dialog Popup menu
!
spot_grd_change   "编辑..." 
spot_grd_grad   "渐变..." 
spot_grd_dup			"复制..."
spot_grd_ren			"重命名..."
spot_grd_del   "删除"
spot_grd_crea_cxf		"创建 CxF/X-4 色标"
!
spoco_corr_swatch  "创建样本册" 
create_tc_button  "创建测试图"
corr_nclr_wiz_button "优化多通道"
ctrl_meas_button  "控制测量......"
!
ctrl_meas    "控制测量"
!
!
! Dialog CREATE_WEDGE
!
title_create_wedge   "创建 CxF/X-4 色标"
create_wedge_dev   "测量设备"
create_wedge_patch_width "色标宽度"
create_wedge_name   "色标名称"
!
!
! Dialog TC_GEN
!
title_TC_GEN  "生成测试图..."
tc_gen_preset  "预设"
tc_gen_device  "测量设备"
tc_gen_reference "参考值"
tc_gen_col_space "颜色空间"
tc_gen_num_patches "色标数"
tc_gen_num_rows "列数"
tc_gen_rows "行数"
tc_gen_rows_manually "手动设置行数"
tc_gen_format "页面大小"
tc_gen_title  "标题"
tc_gen_footer  "页脚"
tc_gen_randomize "随机化"
tc_gen_preview  "预览页面"
save_templ  "另存为预设"
load_templ  "加载预设"
!
!
! Dialog CUSTOM_CS
!
title_custom_cs  "管理自定义颜色空间"
custom_color_space "自定义颜色空间"
color_space_name "颜色空间名称"
channel_abbr  "通道"
color_name   "颜色名称"
substitution  "等效值"
cmyk_first_hint  "通道1到4分别为青色、洋红、黄色和黑色。"
enter_lab_ccs_hint "如果您已获得 Lab 值，请输入该值并让应用程序设置等效值。"
enter_cmyk_ccs_hint "否则，输入等效值并让应用程序设置 Lab 值。"
!
!
! Dialog SPOT_NCLR_OPTI
!
title_SPOT_NCLR_OPTI  "多通道专色优化"
spot_nclr_opti_new_blend "创建新图表"
spot_nclr_opti_output_blend "输出图表"
spot_nclr_opti_meas_blend "测量图表"
spot_nclr_opti_load_blend "加载测量并优化专色渐变"
!
!
! Dialog SPOT_PURGE
!
title_spot_purge  "优化专色"
spot_purge_upper_txt "如果替换颜色的值大于上限且deltaE 限制保持不变或 deltaE 减小，则将其设置为100%。"
spot_purge_lower_txt "如果替换颜色的值小于下限且deltaE 限制保持不变或 deltaE 减小，则将其设置为0%。" 
spot_purge_upper "上限"
spot_purge_lower "下限"
spot_purge_limit "deltaE 限制"
!
!
! Dialog SPOT_CTRL_MEAS
!
title_SPOT_CTRL_MEAS  "专色控制测量"
spot_ctrl_meas_new_tc  "创建测试图"
spot_ctrl_meas_output_tc "输出测试图"
spot_ctrl_meas_meas_tc  "测量测试图"
spot_ctrl_meas_load_tc  "加载测量"
spot_ctrl_meas_save_report "保存报告"
!
!
! Dialog SPOT_IMPORT_CXF
!
title_spoco_cxf_import "从 !{oem_cxf_cloud} 导入 CXF 数据" 
spoco_cxf_user_name  "用户名"
spoco_cxf_password  "密码"
spoco_cxf_connect  "连接"
spoco_cxf_pw_forgot  "忘记密码？"
spoco_cxf_server_url "!{oem_cxf_cloud} 服务器"
spoco_cxf_company  "公司"
spoco_cxf_branch  "分公司"
spoco_cxf_libraries  "库"
spoco_cxf_colors  "CxF/X-4 数据"
spoco_desel_all_button "取消全选"
!
! Dialog SPOT_UPLOAD_SCGX
!
title_spoco_scgx_import		"从 !{oem_cxf_cloud} 导入 SCGX 数据"
spoco_scgx_colors		"SCGX 数据"
cxf_server_protect		"下载时保护配比"
!
!
! Dialogs PR_ISIOUT and SETUP_WIZ_ISIOUT
!
!
title_pr_isiout  "JetINX"
pr_isiout_dir  "输出目录"
pr_isigout_colmode "颜色模式"
pr_isiout_datares "数据分辨率"
pr_isiout_xres  "打印分辨率"
pr_isiout_bpp  "每像素位数"
pr_isiout_comp  "压缩"
pr_isiout_passes "通过" 
pr_isi_colors  "颜色"
pr_isi_ex_white  "白色设置"
pr_isi_ex_var_set "上光设置" 
!
!
! Dialogs PR_SCREENOUT and SETUP_WIZ_SCREENOUT(_2) 
!
title_pr_screenout  "ScreenIJ"
pr_screenout_dir  "输出目录"
pr_screenout_colmode "颜色模式"
pr_screenout_res  "打印分辨率"
pr_screenout_mediaid "纸张"
pr_screenout_mediaid_1 "纸张 #1"
pr_screenout_mediaid_2 "纸张 #2"
pr_screenout_mediaid_3 "纸张 #3"
pr_screenout_mediaid_4 "纸张 #4"
pr_screenout_mediaid_5 "纸张 #5"
pr_screenout_mediaid_6 "纸张 #6"
pr_screenout_mediaid_7 "纸张 #7"
pr_screenout_mediaid_8 "纸张 #8"
pr_screenout_mediaid_9 "纸张 #9"
pr_screenout_mediaid_10 "纸张 #10"
pr_screenout_mediaid_11 "纸张 #11"
pr_screenout_mediaid_12 "纸张 #12"
pr_screenout_mediaid_13 "纸张 #13"
pr_screenout_mediaid_14 "纸张 #14"
pr_screenout_mediaid_15 "纸张 #15"
pr_screenout_mediaid_16 "纸张 #16"
pr_screenout_media_update "更新"
pr_screenout_take_papersize "接管"
pr_screenout_mediatype  "类型" 
pr_screenout_mediasize  "纸张尺寸 (mm)"
pr_screenout_sheetfeed  "进纸"
pr_screenout_sheetfeed_manual "手动加载/卸载"
pr_screenout_sheetfeed_auto  "自动加载/卸载"
pr_screenout_sheetfeed_mixed "自动加载/手动卸载"
pr_screenout_headspeed_fwd  "头前进速度 (mm/sec)"
pr_screenout_headspeed_rvs  "头翻转速度 (mm/sec)"
pr_screenout_offset_x   "X 偏移 (mm)"
pr_screenout_offset_y   "Y 偏移 (mm) " 
pr_screenout_paperwidth   "纸张宽度 (mm)"
pr_screenout_paperheight  "纸张高度 (mm)"
pr_screen_colors    "颜色"
pr_screen_ex_white    "白色设置"
pr_screen_ex_varnish			"上光设置"
!
title_SETUP_WIZ_IMAGEOUT_2 "打印到 IJ 打印机"
!
!
! Dialog PR_ROLAND_UVLAMP_3 
!
pr_roland_lamp_position  "灯位置"
pr_roland_lamp_power_2  "灯功率"
!
!
! Dialog XG_ICC_OPT 
!
icc_opt_profile_quality "配置文件质量"
icc_opt_opti_size  "最佳配置文件大小"
icc_opt_opti_quali  "最佳配置文件质量"
icc_opt_expected_size "预期配置文件大小"
!
!
! Dialogs SPOT_EXCLUDE_CH / SETUP_WIZ_EXCLUDE_CH
!
title_exclude_ch "不包括通道组合"
exclude_ch_txt1  "如果油墨值"
exclude_ch_txt2  "大于 0％，"
exclude_ch_txt3  "设置"
exclude_ch_txt4  "值为0％，"
exclude_ch_txt5  "仅限于"
exclude_ch_txt6  "没有超过"
!
checkbox_exclude_ch "不包括通道组合" 
!
!
! Dialog FP_SUBDIALOG_EXCEPT
!
pr_spoco_spectral_mergemode		"应用光谱合并模式"
pr_spoco_mergemode_neugebauer "默认"
pr_spoco_mergemode_xyz   "xyz"
pr_spoco_mergemode_spectral  "光谱"
!
pr_spoco_spectral_pw			"纸白色"
pr_spoco_spectral_pw_absolute	"绝对"
pr_spoco_spectral_pw_relative	"相对"
pr_spoco_spectral_pw_icc_dat	"ICC 或 .dat"
!
!
! Dialog PR_MUTOH_VJ
!
title_pr_mutoh_vj				"Mutoh VJ"
title_pr_mutoh_vj_adv1 "MutohVJ - 设置"
title_pr_mutoh_vj_media_settings "MutohVJ - 介质设置"
title_setup_wiz_mutoh_vj_adv1 "高级设置"
title_setup_wiz_mutoh_vj_adv2 "介质设置"
title_setup_wiz_mutoh_vj_adv3 "维修"
title_setup_wiz_mutoh_vj_adv4 "更多"
pr_mutoh_effect					"打印效果"
pr_mutoh_effect_none_1			"无 1"
pr_mutoh_effect_none_2			"无 2"
pr_mutoh_effect_none_3			"无 3"
pr_mutoh_effect_fog_1			"雾 1"
pr_mutoh_effect_fog_2			"雾 2"
pr_mutoh_effect_fine_n_fog_1	"精细和雾 1"
pr_mutoh_effect_fine_n_fog_2	"精细和雾 2"
pr_mutoh_effect_fine_n_fog_3	"精细和雾 3"
pr_mutoh_effect_fuzz_1			"模糊 1"
pr_mutoh_effect_fuzz_2			"模糊 2"
pr_mutoh_effect_fuzz_3			"模糊 3"
pr_mutoh_effect_fine_n_fuzz_1	"精细和模糊 1"
pr_mutoh_effect_fine_n_fuzz_2	"精细和模糊 2"
pr_mutoh_effect_fine_n_fuzz_3	"精细和模糊 3"
pr_mutoh_effect_fine_n_fuzz_4	"精细和模糊 4"
pr_mutoh_effect_fine_n_fuzz_5	"精细和模糊 5"
pr_mutoh_effect_fine_n_fuzz_6	"精细和模糊 6"
pr_mutoh_effect_wave_1			"波纹 1"
pr_mutoh_effect_wave_2			"波纹 2"
pr_mutoh_effect_wave_3			"波纹 3"
pr_mutoh_effect_fine_n_wave_1	"精细和波纹 1"
pr_mutoh_effect_fine_n_wave_2	"精细和波纹 2"
pr_mutoh_effect_fine_n_wave_3	"精细和波纹 3"
pr_mutoh_effect_a_super_fine_n_wave	"超精细和波纹 A"
pr_mutoh_effect_b_super_fine_n_wave	"超精细和波纹 B"
pr_mutoh_effect_wow_1			"WOW 1"
pr_mutoh_effect_wow_2			"WOW 2"
pr_mutoh_effect_wow_3			"WOW 3"
pr_mutoh_media_cut				"介质切"
pr_mutoh_singlecut_2steps_low	"单切 2 步低"
pr_mutoh_singlecut_3steps_low	"单切 3 步低"
pr_mutoh_singlecut_2steps_high	"单切 2 步高"
pr_mutoh_singlecut_3steps_high	"单切 3 步高"
pr_mutoh_doublecut_2steps_low	"双切 2 步低"
pr_mutoh_doublecut_3steps_low	"双切 3 步低"
pr_mutoh_doublecut_2steps_high	"双切 2 步高"
pr_mutoh_doublecut_3steps_high	"双切 3 步高"
pr_mutoh_carriage_speed			"笔架速度"
pr_mutoh_carriage_speed_high	"高"
pr_mutoh_carriage_speed_low		"低"
pr_mutoh_shuttle_width			"打印头宽度"
pr_mutoh_shuttle_width_data		"数据"
pr_mutoh_shuttle_width_media	"介质"
pr_mutoh_shuttle_width_machine	"机器"
pr_mutoh_layer_print_speed		"层打印速度"
pr_mutoh_layer_print_speed_fast		"快速"
pr_mutoh_layer_print_speed_normal	"正常"
pr_mutoh_layer_print_speed_slow		"慢速"
pr_mutoh_vacuum_fan					"真空风扇"
pr_mutoh_vacuum_fan_high			"高"
pr_mutoh_vacuum_fan_medium			"中"
pr_mutoh_vacuum_fan_low				"低"
pr_mutoh_vacuum_fan_off				"关"
pr_mutoh_platen_heater_temp			"压纸卷轴加热器温度 (°)"
pr_mutoh_media_thickness			"介质厚度 (um)"
pr_mutoh_side_margin				"边距大小 (mm)"
pr_mutoh_start_feed					"初始进纸 (mm)"
pr_mutoh_media_feeding_adjustment	"介质进纸调整 (1/100%)"
pr_mutoh_dry_time					"干燥时间（秒）"
pr_mutoh_layer_print_mode_color_on_white	"彩色上层白色下层"
pr_mutoh_layer_print_mode_white_on_color	"白色上层彩色下层"
pr_mutoh_layer_print_mode_white_only		"仅白色"
pr_mutoh_num_prints				"打印次数"
pr_mutoh_condition_diagnosis	"打印条件诊断"
pr_mutoh_diag_off				"关"
pr_mutoh_diag_palette			"调色板"
pr_mutoh_diag_setup_list		"设置列表"
pr_mutoh_diag_nozzle_check		"喷嘴检查"
pr_mutoh_diag_nozzle_check_b	"喷嘴检查 B"
pr_mutoh_mediacut_off			"关"
pr_mutoh_head_cleaning			"头清洁"
pr_mutoh_headcleaning_off		"关"
pr_mutoh_headcleaning_short		"短"
pr_mutoh_headcleaning_normal	"正常"
pr_mutoh_headcleaning_long		"长"
pr_mutoh_headcleaning_little	"费用低"
pr_mutoh_user_definition		"用户定义"
pr_mutoh_temporary_mode			"临时模式"
pr_mutoh_interval_time						"间隔 (1/10 秒)"
pr_mutoh_count_of_color_ink_layer_print		"彩色墨层打印"
pr_mutoh_count_of_white_ink_layep_print		"白色墨层打印"
pr_mutoh_advanced_testing					"高级测试"
pr_mutoh_device_number			"设备号"
pr_mutoh_dot_family				"网点族"
pr_mutoh_dotfamily_large		"大"
pr_mutoh_dotfamily_medium		"中"
pr_mutoh_dotfamily_small		"小"
pr_mutoh_dot_type				"网点类型"
pr_mutoh_dotsize_default		"默认"
pr_mutoh_dotsize_normal			"正常"
pr_mutoh_dotsize_variable		"可变"
pr_mutoh_dotsize_large			"大"
pr_mutoh_dotsize_middle			"中"
pr_mutoh_dotsize_small			"小"
pr_mutoh_pass_methode			"通道方式"
pr_mutoh_k_mutoh_pass_1			"1 通道"
pr_mutoh_k_mutoh_pass_2			"2 通道"
pr_mutoh_k_mutoh_pass_4			"4 通道"
!
pr_mutoh_maintenance "维修"
pr_mutoh_testprint_start "打印"
pr_mutoh_headcleaning_start "开始"

pr_mutoh_layer_pr "层打印"
pr_mutoh_print_layer_off "关"
pr_mutoh_print_layer_w_under "白色底图 (KCMYLcLm - on W)"
pr_mutoh_print_layer_w_over "白色顶图 (W on-KCMYLcLm)"
pr_mutoh_print_layer_three "三层 (KCMYLcLm - W - KCMYLcLm)"

pr_mutoh_media_settings			"介质设置..."


! Dialog IFP_TASK_PLANING
!
ifp_tp_title "油墨流量准备任务计划"
ifp_tp_queue "队列"
ifp_tp_file_to_print "打印文件"
ifp_tp_enable		    "激活安排"
ifp_tp_start_now	    "立即打印"
ifp_tp_printer		    "打印机"
ifp_ink_notification_enable "激活油墨维护通知"
ifp_weekly		    "每周"
ifp_biweekly		    "每两周"
ifp_threeweekly		    "每三周"
ifp_monthly		    "每四周"
ifp_last_ink_maintenance    "上一次油墨维护"
ifp_next_ink_maintenance    "下一次油墨维护"
!
!
! Dialog RFP_CCS 
!
title_rfp_ccs		"创建常见颜色空间"
ref_profile_list	"选择打印机特征文件：\n参考打印机配置文件，ICC 配置文件或测量结果"
rfp_ccs_save		"另存为 RFP 文件..."
save_ccs_as_icc		"同时另存为 ICC 配置文件"
!
!
! Dialog (MF_)SETTINGS_GEN
!
themes					"下一个程序启动时要使用的颜色方案"
!
!
! Dialog CXF_GET_INPUT_DIALOG 
!
cxf_get_input_dialog_title	"CxF 工具箱 - 用户输入" 
!
!
! Dialog SPOCO_DIALOG
!
spot_dev_prof				"设备配置文件"
spoco_gamut_viewer			"色域查看器"
!
!
! Dialog SPOT_UPLOAD_SCGX
!
cxf_server_repl_lib		"替换库"
cxf_server_add_lib		"添加到库"
create_library_button	"创建库"
delete_library_button	"删除库"
rename_library_button	"重命名库"