Page 16 of 70

Shenzhen Zhiyuan CNC Co., Ltd ZY72B8G System Manual
acc
(controlling the speed change). Generally
speaking, stepper motors typically have a
maximum speed of 1000mm/s ² To
3000mm/s ²， Servo motors are usually
adjustable to a larger range, such as
1000mm/s ² Up to 5000mm/s ²。 Adjust
according to specific circumstances.
XY Sprint Jerk m/s³
The acceleration speed during idle
machining (controlling the speed of
acceleration change) is generally set to the
default value. The speed of air running can
generally be faster, so it can be adjusted to
5m/s ³ Left or right, or slightly larger, with
a maximum capacity of 300m/s ³， But it is
generally not recommended to adjust it
too much, as the impact of the motor is
relatively large, such as 120m/s ³ Almost
done. Of course, this needs to be adjusted
according to the specific situation of the
device. For low-power devices, this value
can be slightly lower to make the motor
accelerate more smoothly.
Shenzhen Zhiyuan CNC Co., Ltd
11
    "