Page 15 of 70

Shenzhen Zhiyuan CNC Co., Ltd ZY72B8G System Manual
Generally, adjustments are made based on
the equipment. Generally speaking, when
the motor load of the equipment is light,
the starting speed can be slightly higher
(such as 15mm/s), and when the
equipment is heavy, the starting speed can
be slightly lower (such as 5mm/s).
Generally, a speed range of 10mm/s to
20mm/s is sufficient. Of course, a slightly
faster speed is also possible, but it is
recommended not to exceed 50mm/s.
XY idling
mm/s
The speed during idle machining can
running speed
usually be slightly higher than the
machining speed. If a stepper motor is
used, it can usually run faster to around
600mm/s. If a servo motor is used, it can
usually run up to 800mm/s or a bit larger.
According to the actual adjustment, ensure
that the equipment can withstand the
range and adjust it under the premise of
stable operation.
XY runaway mm/s² The acceleration during idle processing
Shenzhen Zhiyuan CNC Co., Ltd
10
    "