Operating switch and interface definition
Pressure gauge adjustment: the pressure regulating valve is pulled outward, and
then adjusted to the maximum adjustment value (with direction),
The pressure gauge is adjusted to 0.4-0.45 kg and can be used.
Arc voltage output: Arcvoltage (1:1 arc output, plug 1 pin is arc positive +, 2
The foot is the arc anode -).
Control signal: (plasma arc signal)
Success signal: (arc feedback output, arc pressure enable output sent to CNC)
Ending)
Corner signal: Cornersignal (CNC), DC24V high level, 1 pin
Positive +, 2 feet are negative, when high, it can be switched to the corner to set the
current to recover when low
The cutting setting current can be switched repeatedly during the cutting process
(the use of cutting occasions is relatively thin
Plate cutting to prevent plate overburning.
Mesh cutting: applicable to continuous mesh plate cutting, plasma can be
continuously arc lifting
High cutting efficiency.
Arc voltage output (1 +, 2 -)=== connected to the arc voltage input of the governor
(arc voltage value 1:1)
Control signal (arc switch )=== link CNC or HTC arc
Corner signal==== system corner (custom function for sheet cutting)
