Page 43 of 48
![](Raycus%20Continuous%20Wave%20Fiber%20Laser%20User%20Guide%2C%20C1500S%20%26%20C2000S.pdf-43.html%20-%20foldersweb.png)
Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus CW fiber laser
Figure 31 The homepage of PC software
If any alarm occurs (except for Interlock alarm) when the laser is running, the homepage
will display the alarm that occurs, and the ALARM light (yellow) on the front panel of the laser
will light up, the laser will stop emitting and lock.
When the Interlock is abnormal, the output of Ready signal is low, and the Interlock state is
abnormal in the software homepage, but the laser is not locked, and the ALARM light (yellow)
is not lit. The output of Ready signal is on high level when the Interlock is normal.
5.2 Alarm solutions
The instructions and solutions of alarms are as follows:
Table 14 Instructions and solutions for alarms of laser
Alarm name
System Timer Alarm
Laser On Button
Alarm
Alarm instructions and solutions
Instruction:
The internal clock of laser is abnormal.
Solution:
If it displays this alarm, please contact Raycus.
Instruction:
This alarm occurs when the “LASER” button on the front
panel of the laser has been pressed before the laser was
28