BWT20 Qilin double swing handheld laser
double pendulum indwuesltdriinagl wsyesltdeimngusheeramdaneuqaluipV1m.0ent.
3. Please repeatedly confirm whether the cable joint is connected and locked normally.
After locking, it can be wrapped with insulation tape.
4. Check whether the laser head and the optical fiber are locked and connected. After
confirming that it is normal, use the beautiful strip tape to seal and wrap it to ensure
that the dust does not enter the laser head cavity.
5. Check whether there is water seepage in the cavity and many waterways in the
cavity. Do not loosen the screws without professional training to prevent water
droplets from entering the cavity.
6. Check whether the protective lens drawer is normal, ensure that the sealing ring is
normal and effective, when replacing the protective lens, ensure that the alcohol
wipes the external stains of the laser head, at least 5 times, and ensure that the lens
environment is clean and clean before the lens is replaced.
7. The laser head is so complex. To avoid short circuit, stay away from the water
source and make sure that no liquid can be sprayed on the laser head.
8. Laser head refuses to use strong wind to blow and clean the laser head, and can
only be wiped with alcohol and dust-free cloth.
9. The laser head is installed with a digital motor. When used, it must be put gently to
prevent motor failure.
10. When the laser head is not used, please use the system gas blowing air for many
times to discharge the dust, and remove the copper nozzle, use the sealing tape to
seal, and use the copper nozzle to blow the air more than 2 times before using it.
31
    "