深圳市睿法智能科技有限公司
Tool: 2mm inner hexagon wrench, clean cotton swab, alcohol and masking tape
The assembly and disassembly of lens should be operated with hands wearing
dust-free gloves or fingertips in clean environment.
Steps
Step 1: loosen M4 screw with a 2mm inner hexagon wrench.
Step 2: pull out of the focusing module horizontally
Step 3: seal the port with masking tape to stop dust from entering the cavity to
cause contamination.
Step 4: the cover is gently pressed down and rotated 90°.Align the two
convex places with the left and right openings. Take out the cover upward and the
protective lens can be changed.
(Note: install lens in concave and convex
direction.)
13
    "