Shenzhen RelFar Intelligent Technology Co., Ltd.
system function parameters.
[scan width]: Used to set the length of laser scanning.
[Alarm State Area]: After the alarm signal is enabled, the real-time
display of protective gas underpressure alarm, cold water flow alarm,
laser alarm and temperature alarm, and galvanometer state is conducted.
The real-time display of safety lock state will arise when the safety
lock is enabled; When the alarm signal isn't triggered, the
corresponding alarm state will turn into blue; When the alarm occurs,
the corresponding alarm icon will flicker between red light and blue
light.
[Red light | switch on/off]: The red light switch can control the switch of
the laser red light indication.
[preparation \ stop | cleaning]: Emission of laser can be allowed or
forbidden by the button. In a state ready to clean, press the cleaning
start button will be laser cleaning; Under the stop cleaning state, press
the cleaning start button will not produce light cleaning.
7.2 System parameter setting.
System parameter setting: The modification takes effect after being
saved.
Double click light extraction enabling: Switch off the enabling function.
Click the button once and the laser will come out. Switch on the enabling
function. Double click the button twice and the laser will come out.
Delay in enabling gas: Delay in enabling gas can be set when processing
is enabled. The emission of laser will start after blowing is delayed for a
period of time by pressing the external start button.
Delay in disenabling gas: Delay in disenabling gas can be set when
processing is disenabled. Stop blowing after stopping laser emission, and
then delaying for a period of time when processing is stopped.
Scale factor: This parameter is used to set the maximum range of the
galvanometer. The value must be consistent with the actual range of the
galvanometer; otherwise, the actual length and width of the light output
may be inaccurate.
Enabling the safety lock: Select whether to enable security lock
protection.
[Chinese/English]: Switch between Chinese and English languages.
Automatic screen lock: When the automatic screen lock is enabled, the
system automatically switches to the screen lock page when no operations
are performed on the touchscreen after a period of time.
29
    "