BWT20 Qilin Wobble Handheld Laser Welding Head
3.1 Introduction to HMI function and operation
3.1.1 Introduction of main interface function and operation
The operating panel of Qilin wobble handheld laser welding system adopts a 7-inch
configuration capacitive touch screen, which is dignified, generous and easy to
operate.The relevant parameters of the laser and the laser swing head can be set
respectively, and the light mode can be controlled. At the same time, the process
parameters stored inside the machine can be selected on the main interface. At the
same time, these art parameters can be adjusted and saved to facilitate the subsequent
direct call, and the art package can also be customized.
3.1.2 Setting of interface and operation introduction
Main interface pic
Alarm signal lamps: Being the monitor and alarm the temperature of laser head, air
pressure, welding gun, conduction and handle. Full alarm status
is displayed synchronously on the main screen and alarm light to
remind users and quickly troubleshoot problems.
FGAP: Laser comes out only if FGAP button is on.
Gas: When the Gas button is on, the air valve port will output 24V voltage, and the
gas will automatically provide gas without opening it during welding.
Fillings: The wire feeder works when fires when the Fillings button is on; When it off,
the wire feeder won’t work.
Process Package:
There are 4 common use materials, definitions as follows:
SUS: stainless steel // CS: carbon steel
SECC: Galvanized plate // AL: aluminum
Shenzhen Qilin Laser Application Technology Co., Ltd.
    "