Generate
Maximum Value
Minimum Value
Modify
4.9.9. Expand Parameter
Expand Parameter: Figure 4-39.
Y Scan: The scan will run along Y axis line by line.
Y direction scanning: Set y-scan, the printing direction will be changed to y-
scan.
Scan line Increment: This item indicates whether to scan line by line or skip
some lines. This function may quicken the marking speed when in low
precision marking requirement.
Bitmap scan increment: When there are many image pixels or large image
area, printing is time-consuming. You can scan additional lines, skip several
lines for printing, but the printing effect will be reduced.
Disable Mark Low Gray Point: This item indicates that every point is marked
or only marking bigger gray points. This function may quicken the marking
speed when in low precision marking requirement.
A point below the pixel value: Set the pixel point below which pixels will not
be marked.
Line feed malposition: The point isn’t aligned between two adjacent rows,
but the point is aligned with the position which is the middle of two points in
the previous line, to avoid the trace of marking.
Point interlaced dislocation: In even rows, the first pixel is removed, and
each pixel in the remaining rows moves forward one pixel in turn.
Optimize Mode: calculate the marking speed according to the DPI and
frequency to optimize marking speed and result.
：。
106 / 217
