GigE Area Scan Camera User Manual

Parameter

TEC Enable

TEC Temperature

TEC Voltage

Find Me

Device Max Throughput

(Kbps)

Device PJ Number

HB Abnormal Monitor

HB Version

Read/Write

Read & Write

Read & Write

Read Only

Read & Write

Read Only

Read Only

Read Only

Read Only

Description

It enables TEC function.

It sets the target of TEC temperature in degrees

Celsius (°C).

It is the TEC voltage.

The function of finding me is executed. Click

Execute to find the currently operating device.

It is max. bandwidth of the data that can be

streamed out of the device.

It is the device’s project number.

It monitors image stream condition.

It is the version of the image compression mode.

13.2 Embed Information into Image

The device supports embedding information into image data. The information will be

embedded into the image according to the enabling condition of each type of information

in the order of the image embedding information listed in the table below.

Note

● White Balance is only available for the color devices.

● Width, Height, Offset X, Offset Y and Pixel Format are image embedding information

that the device supporting Chunk function has.

Table 13-2 Image Embedding Information

Image Embedding Info. Byte

Data Format

Timestamp

Gain

Exposure

Brightness Info

4

Refer to figure 11-1

4 bytes are used to transfer the gain information. Each

4

low 8 bits of the 4 valid data are combined to transfer

the gain information. Value Range: 0 to 1023. Note:

High bits will be complemented with 0 automatically.

4

4 bytes are combined to show the exposure time, and

the unit is µ s.

4

Ranges from 0 to 4095

White Balance

8

R/G/B occupies 2 bytes each. Value Range: 0 to 4095.

Frame Counter

4

Ranges from 0 to 232-1

Ext Trigger Count

4

Ranges from 0 to 232-1

90