GigE Area Scan Camera User Manual

12.11 Set Exposure Auto

The device supports 3 types of exposure mode, including Off, Once and Continuous. Click

Acquisition Control → Exposure Auto, and select Exposure Auto according to actual

demands.

● Off: The device exposures according to the value set in Exposure Time (µ s).

● Once: The device adjusts the exposure time automatically according to the image

brightness. After adjusting, it will switch to Off mode.

● Continuous: The device adjusts the exposure time continuously according to the image

brightness.

When the exposure mode is set as Once or Continuous, the exposure time should be

within the range of Auto Exposure Time Lower Limit (µ s) and Auto Exposure Time Upper

Limit (µ s).

Figure 12-26 Set Exposure Time under Once or Continuous Mode

Note

● If the device is under Continuous exposure mode, once external trigger mode is enabled,

the device will automatically switch to Off exposure mode.

● Some models of the device do not support Once or Continuous exposure mode. You can

enter Exposure Time (µ s) directly.

12.12 Set WDR Mode

Note

The WDR function may differ by device models.

The WDR function makes the device have a stable imaging ability in a changing

environment between brightness and darkness.

Steps

1. Go to Acquisition Control → WDR Mode.

2. Select On as WDR Mode to enable the function or Off to disable it.

67