GigE Area Scan Camera User Manual

Switch

The switch value can provide low electrical level to trigger line 2.

PWR

Camera Power

Bi-direction I/O

> 3.3 V

0 V

Camera Power Ground

GND of PWR and VCC

Figure 11-15 Input Signal Connects to Switch

Configured as Output Signal

The output signal wiring is shown below when the device's Line 2 is configured as output

signal.

Note

Output signal wiring may differ by the external device type.

PNP Device

PWR

VCC

Camera Power

Bi-direction I/O

Camera Power Ground

●

PNP Power

Signal Line

PNP Power Ground

GND of PWR and VCC

PNP Device

Figure 11-16 Output Signal Connects to PNP Device

NPN Device

● If the VCC of NPN device is 24 VDC, it is recommended to use 4.7 KΩ pull-up resistor.

● If the VCC of NPN device is 12 VDC, it is recommended to use 1 KΩ pull-up resistor.