PNP Device

GigE Area Scan Camera User Manual

PWR

VCC

Camera Power

PNP Power

Opto-isolated Output

Opto-isolated

Signal Ground

Camera Power Ground

Signal Line

●

PNP Power Ground

PNP Device

GND of PWR GND of VCC

Figure 11-11 Output Signal Connects to PNP Device

NPN Device

● If the VCC of NPN device is 24 VDC, it is recommended to use 4.7 KΩ pull-up resistor.

● If the VCC of NPN device is 12 VDC, it is recommended to use 1 KΩ pull-up resistor.

PWR

VCC

Camera Power

● NPN Power

Opto-isolated Output

Opto-isolated

Signal Ground

Camera Power Ground

● Signal Line

●

NPN Power Ground

GND of VCC

GND of PWR

Figure 11-12 Output Signal Connects to NPN Device

NPN Device

11.2.3 Bi-Directional Signal Wiring

The device’s Line 2 can be used as input signal and output signal.

Configured as Input Signal

The input signal wiring is shown below when the device's Line 2 is configured as input

signal.

Note

Input signal wiring may differ by the external device type.

52