GigE Area Scan Camera User Manual

Configured as Input Signal

Note

● Make sure that the input voltage is not from 0.3 VDC to 3.3 VDC as the electric status

between these two values are not stable.

● The breakdown voltage is 30 VDC. Keep voltage stable.

● To prevent damage to the GPIO pin, please connect GND first and then input voltage in

Line 2.

With the condition of 100 Ω resistance and 5 VDC voltage, the logic level and electrical

feature of configuring Line 2 as input signal are shown below.

Logic 1

Input Level

Logic 0

Input Level

Internal Logic

TDR

TDF

Figure 11-6 Input Logic Level

Table 11-4 Input Electrical Feature

Parameter Name

Parameter Symbol

Value

Input Logic Level Low

VL

0 VDC to 0.3 VDC

Input Logic Level High

VH

3.3 VDC to 24 VDC

Input Falling Delay

TDF

< 1 μs

Input Rising Delay

TDR

< 1 μs

Configured as Output Signal

Note

The maximum current is 25 mA and the output impedance is 40 Ω.

48