GigE Area Scan Camera User Manual

9.7 Set Trigger Related Parameters

In external trigger mode, you can set five related parameters, including acquisition burst

frame count, trigger activation, trigger delay, trigger cache, and trigger debouncer.

Note

● Different trigger sources can set various parameters in external trigger mode.

● In hardware, counter or free trigger, you can set all five parameters mentioned above.

● In software or action command trigger, you can set acquisition burst frame count,

trigger delay, and trigger cache only.

9.7.1 Set Acquisition Burst Frame Count

In external trigger mode, you can set acquisition burst frame count. Go to Acquisition

Control → Acquisition Burst Frame Count, and enter Acquisition Burst Frame Count

according to actual demands.

Figure 9-16 Set Acquisition Burst Frame Count

Note

● The range of Acquisition Burst Frame Count is from 1 to 1023.

● If Acquisition Burst Frame Count is 1, the device is in single frame trigger mode. If

Acquisition Burst Frame Count is larger than 1, the device is in multi-frame trigger

mode.

● If Acquisition Burst Frame Count is n, when input 1 trigger signal to the device, the

device stops acquiring images after exposing n times and outputting n frame images.

Burst Count = 4

Trigger

Sensor

Exposure

Figure 9-17 Sequence Diagram of Acquisition Burst Frame Count

35