GigE Area Scan Camera User Manual

13.7.2 Basic Transfer Control

The parameters of basic transfer control are shown below.

Figure 13-15 Basic Transfer Control

Table 13-6 Parameters of Basic Transfer Control

Parameter

Read/Write

Description

Transfer Selector

Read & Write

It selects the transfer source.

Transfer Control Selector Read & Write

It selects the transfer mode.

Transfer Queue Max Block

Count

Read Only

It displays the max. image quantity that the

device’s memory can save before the

compression.

Transfer Queue

Block Count

Current Read Only

It displays current image quantity saved by

the memory.

Transfer Queue Over Flow

Count

Read & Write

It is the image quantity discarded by FPGA.

Transfer Queue Mode

Read & Write

It is the operating mode of memory queue.

13.8 Set Cooling Fan

Note

● The cooling fan may differ by device models.

● The temperature unit here is Celsius degree.

For device with cooling fan, you can go to Analog Control → Fan Open Threshold to set

fan parameters.

When the device’s temperature is higher than the value you set in Fan Open Threshold, the

104