Chapter XII Adhesive Liquid Processing
1. The Preparation and Precaution of adhesive liquid(coating)
1) Adhesive liquid is composed by A, B two kinds of raw material liquids.
Before using, compound the A, B two kinds of raw material liquids according
to the volume 1:1, then fully mixing (it is better to use 3 hours later after
mixing).
2) The prepared adhesive liquid should be used up within 2 weeks , otherwise
it will reduce adhesion effect.
2. The Usage and precaution of adhesive liquid
1) For the glass, ceramics and other hard substrate surface, prior to remove
dust and grease on the surface
2) Take appropriate mixed adhesive liquid (6 - 8ml/m2), wipe a thin layer on
the hard substrate evenly
3) You can begin UV printing after the adhesive liquid dried
Precautions
1. Hard surface after wiping still have a good adhesive effect within one
week ,but to ensure that the surface is clean without pollution, including anti-
static dust etc..
2. Wipe tools can be watering can or silicone soft material, or wipe with the
gauze or non-woven cloth directly .
3. Suggest the adhesive liquid can be stored in glass or HDPE container, seal
and store in a cool, ventilated place
The media will will produce great static under the UV light, and has a great
influence on the inkjet of the nozzle . Better to equipe with negative ion
electrostatic wind blowing on the surface of the board. Or wipe the surface
with alcohol or glass water before printing.
第 80 页 共 89 页
