30038
30039
30040
30041
30042
30043
30044
30045
30046
30047
triggered.
Motherboard origin limit signal is
triggered
Spray board end limit signal is
triggered
Motherboard end limit signal is
triggered
Lack of data during printing
Write data to the card failure
Do not support the specified
data combination
Print 1Pass data, the printed
data accumulated number error
Print file number of color
channels is greater than the
actual print color
channel number
The current PRN dot number do
not
match the nozzle dot number
Read 1PASS data failure
connected
with the origin limit switch normally
2. Restart the hardware
1. Check whether the spray board
connected with the end limit switch
normally
2. Restart the hardware
1. Check whether the motherboard
connected with the end limit switch
normally
2. Restart the hardware
1. Check whether the PRN file is
normal
2. Check whether the board signal
light is
normal
3. Restart the software
4. Restart the hardware
1. Check whether the printer is
connected
properly
2. Check whether the board signal
light is
normal
3. Restart the software
4. Restart the hardware
1. Temporarily do not support the
current setting of nozzle groups
2. Reset the nozzle groups in the
configuration file
1. Check the encoder strip
2. Check the USB interface
3. Restart the machine and the
software
1. Check whether the number of the
PRN color channel meet the number
of the actual output color channel
1. Check whether the current PRN dot
number is consistent with the nozzle
dot number
1. Please contact the software
provider
第 49 页 共 89 页
