CIX.ini README NOTES
=============================
Driver creates Biesse CIX format directly

----------------------------------------------------------------------------------------------------------------

The optional ini file CIX.ini has these parameters:

ZSafetyCheck
	If present, Z depths are limited in this way (default to 2 if no value set) :

	Routing Z Safety Check, don't allow z depth < -ZSafetyCheck
	Drilling Z Safety Check, don't allow z depth > (ZsafetyCheck + material.thickness)

Drilling
	No gang drilling optimisation is done by the CIX driver as it is done at CNC by bSolid or BiesseWorks at runtime
	Therefore each drill operation is added as a single drill
	Each drill on the CNC is added to the tool changer, Has Drill Function is checked but Has drill bank is unchecked
	The CIX driver has a way of controlling drill type output:
		The drill type  selection can be overridden by the use of pecklift as a flag.
		A value of 0 selects BiesseWorks:NORMALE bSolid:Normal - DEFAULT BEHAVIOUR - standard drill bit for blind drilling
		A value of 1 selects BiesseWorks:LANCIA bSolid:Flat Bit - through drill bit for through drilling
		A value of 2 selects BiesseWorks:SVASATA - bSolid:Countersunk - Countersunk drill bit
		A value of 3 selects BiesseWorks:NORMALEG - bSolid:NORMALEG - large standard drill bit for blind drilling
		A value of 4 selects BiesseWorks:NORMALE bSolid:Normal If depth < board.thickness Else BiesseWorks:LANCIA bSolid:Flat Bit - Through bit selected

Router & Drill Speeds
	Machining speeds are read from the Global settings or from the strategy
	'RSP' Biesse parameter Rotation speed rpm -> Spindle rpm EnRoute/EzyNest
	'WSP' Biesse Work speed -> Feed Rate in mm/min EnRoute/EzyNest
		Routing: PLUNGE SPEED IN THE BOARD - plunge rate in mm/min - BiesseWorks:Lowering speed, speed with which the tool moves from the surface of the piece to the position where the machining operation begins
		Drilling: PLUNGE SPEED IN THE BOARD - plunge rate in mm/min - BiesseWorks:feed work speed mm/min, speed with which the tool makes the bore