New Machine Setup Process

1: Upgrade System
a. Format a Flash Drive to FAT32 Format
b. Copy All those Files in
c. (Keypad) Menu -> System Upkeep -> System Update (Reboot)
d. (Keypad) Delete Parameter
e. (Keypad) Update system (from 1% to 100%), then Reboot

2: Import Parameters
a. (Keypad) Menu -> Param Upkeep -> Import Params
b. reboot

3. Polarity
a. (Keypad) Menu -> Diagnosis -> Ports List
b: Check GX1 to GX16, Depends on Limit Switch, Polarity Might Need to Change

4. Pulse Equivalent
a. (Keypad) Menu -> Mfr Param (Manufacture Parameters) -> Pulse Equiv
   XY: 0.00375, Z: 0.002 (Verify Size, May need to half or double)

5: Position Settings
a. Homing
b. (Keypad) Menu -> Mfr Param (Manufacture Parameters) -> Machine Stroke
c. X(2070) Y(3280) Z(-320), this can adjust slightly based on machine difference
d: for Tool Change Stroke, Similar as Machine Stroke
   Upper: X(2070) Y(3280) Z(0), Lower: X(0) Y(0) Z(-260), need to adjust based on machine, as long as tool change won't trigger limit
e. Reboot
f: Set Tool Pre-setter Position and Thickness
g: Set Each Tool Change Holder Positions