Specification
7
Principal application
Transmission type
Receiver/interface
Recommended styli
Weight with disc stylus
Cable
(to interface)
Specification
Length
Electrical
connection
Sense directions
Unidirectional repeatability
Stylus trigger force
(see notes 2 and 3)
Sealing
Mounting
Storage temperature
Operating temperature
Tool measuring and broken tool detection on all sizes of vertical
and horizontal machining centres and all gantry machining centres.
Hard-wired transmission
MI 8-4, HSI or HSI-C
Disc stylus (tungsten carbide, 75 Rockwell C) or
Square tip stylus (ceramic tip, 75 Rockwell C)
1055 g (37.21 oz)
Ø4.4 mm (0.17 in), 4-core screened cable, each core 7 × 0.2 mm
10 m (32.8 ft)
Cable on the end of unit
±X, ±Y, +Z
1.00 μm (40 μin) 2σ (see note 1)
1.30 N to 2.40 N, 133 gf to 245 gf (4.68 ozf to 8.63 ozf) depending
on sense direction
IPX8, BS EN 60529:1992+A2:2013
(IEC 60529:1989+A1:1999+A2:2013)
M12 (1/2 in) T bolt (not supplied)
Optional Spirol pins to allow accurate remounting
−10 °C to +70 °C (+14 °F to +158 °F)
+5 °C to +60 °C (+41 °F to +140 °F)
