ACD320 user manual
Parameter Description
F7.30
The 0st step running time.
0～999.9
0
F7.31
The 1st step running time.
0～999.9
0
F7.32
The 2nd step running time.
0～999.9
0
The 3rd step running
F7.33
0～999.9
0
time.
F7.34
The 4th step running
0～999.9
0
time.
F7.35
The 5th step running
0～999.9
0
time.
F7.36
The 6th step running
0～999.9
0
time.
The 7th step running
F7.37
0～999.9
0
time.
In simple PLC run mode, PLC run and skip the step whose running time is set to be 0, and
simple PLC run will not operate if all the set is 0.
When PLC run from 0th to the 7th step, the parameter corresponding to the frequency set is
F4.29~F4.36.
Function Code
Name
Setting Range
Default
Value
F7.38
0: Record when power off
PLC selection record or
1: No record when power
0
not when power off.
off
PLC selection record or not when power off means whether to record the running status
before power off.
Function
Code
Name
Setting Range
Default Value
F7.39
0:s
running time unit
0
1:min
F7.40
Failure shield
0: Effective
0
1:Ineffective
Discription of failure shield display:
Display content when stop
Code
BIT0: Module protection shield
1
0:Invalid 1: Valid
BIT1: Soft overcurrent shield.
2
0:Invalid 1: Valid
BIT2: Over-voltage shield.
4
0:Invalid 1: Valid
- 102-
    "