05 - 17 Time Duration of 1st Step Speed

05 - 18 Time Duration of 2nd Step Speed

05 - 19 Time Duration of 3rd Step Speed

05 - 20 Time Duration of 4th Step Speed

05 - 21 Time Duration of 5th Step Speed

05 - 22 Time Duration of 6th Step Speed

05 - 23 Time Duration of 7th Step Speed

05 - 24 Time Duration of 8th Step Speed

05 - 25 Time Duration of 9th Step Speed

05 - 26 Time Duration of 10th Step Speed

05 - 27 Time Duration of 11th Step Speed

05 - 28 Time Duration of 12th Step Speed

05 - 29 Time Duration of 13th Step Speed

05 - 30 Time Duration of 14th Step Speed

05 - 31 Time Duration of 15th Step Speed

Settings

0.0 to 65500

Chapter 5 Parameters|VFD-B Series

Unit: 1 or 0.1sec (See Pr.05-32)

Factory Setting: 0.0

Pr.05-17 to Pr.05-31 correspond to operation time of each step speed defined by Pr.05-00 to

Pr.05-14. The maximum setting of 65500 seconds will be displayed as “t6550•”. If display

shows “t6550”, it means 6550 seconds.

If a parameter is set to “00” (0 sec), the corresponding step will be skipped. This is commonly

used to reduce the number of program steps.

05 - 32 Time Unit Settings

Settings

00 1 sec

01 0.1 sec

This parameter sets the time unit for Pr.05-17~Pr.05-31.

Factory Setting: 00

05 - 33 The Amplitude of Wobble Vibration

Settings

0.00 to 400.00 Hz

05 - 34 Wobble Skip Frequency

Settings

0.00 to 400.00 Hz

Factory Setting: 0.00

The frequency change will be as shown in the following diagram. These two parameters are

specific for textile machinery.

Revision July 2008, BE16, SW V4.08 & V5.00

5-63