Chapter 5 Parameters|VFD-B Series

Group 5: Multi-step speeds and PLC (Process Logic Control) parameters

05 - 00

05 - 01

05 - 02

05 - 03

05 - 04

05 - 05

05 - 06

05 - 07

05 - 08

05 - 09

05 - 10

05 - 11

05 - 12

05 - 13

05 - 14

1st Step Speed Frequency

2nd Step Speed Frequency

3rd Step Speed Frequency

4th Step Speed Frequency

5th Step Speed Frequency

6th Step Speed Frequency

7th Step Speed Frequency

8th Step Speed Frequency

9th Step Speed Frequency

10th Step Speed Frequency

11th Step Speed Frequency

12th Step Speed Frequency

13th Step Speed Frequency

14th Step Speed Frequency

15th Step Speed Frequency

Settings

0.00 to 400.00 Hz

Unit: 0.01

Unit: 0.01

Unit: 0.01

Unit: 0.01

Unit: 0.01

Unit: 0.01

Unit: 0.01

Unit: 0.01

Unit: 0.01

Unit: 0.01

Unit: 0.01

Unit: 0.01

Unit: 0.01

Unit: 0.01

Unit: 0.01

Factory Setting: 0.00

The Multi-Function Input Terminals (refer to Pr.04-04 to 04-09) are used to select one of the

AC motor drive Multi-step speeds. The speeds (frequencies) are determined by Pr.05-00 to

05-14 as shown above. They are also used in conjunction with Pr.05-15 to 05-31 for PLC

programs.

05 - 15 PLC Mode

Settings

00

01

02

03

04

Factory Setting: 00

Disable PLC operation

Execute one program cycle

Continuously execute program cycles

Execute one program cycle step by step

Continuously execute program cycles step by step

This parameter selects the mode of PLC operation for the AC motor drive. The AC motor drive

will change speeds and directions according to the desired user programming.

This parameter can be applied in the PLC operation of general small machines, food

processing machines and washing equipment.

Revision July 2008, BE16, SW V4.08 & V5.00

5-59