CHECKING THE CLEANING OF THE TOOL-HOLDER CONE AND THE
CONICAL HOUSING THE SPINDLE SHAFT.
ISO 30 conical surface of the tool
holder (highlightened in black)
Conical surface of ISO30
electrospindle (highlightened in black)
Before using the electrospindle, ensure that the conical surfaces of the tool-holders (highlighted in black)
and the conical surface of the tool-holder housing in the spindle shaft (highlighted in black) are thoroughly
clean, with no traces of dust, grease, cooling liquid, oil or metallic particles, nor traces of oxide or scale;
Daily cleaning is recommended, at the end of the working day, using a clean, soft cloth.
DO NOT DIRECT
JETS OF
COMPRESSED AIR
INTO THE SPINDLE
SHAFT WHEN THE
TOOL-HOLDER
CONE IS ABSENT.
TO CLEAN THE SURFACES HIGHLIGHTED IN THE FIGURE, USE CLEAN, SOFT CLOTHS;
NEVER USE ABRASIVE INSTRUMENTS SUCH AS WIRE WOOL, METAL SCRAPERS, EMERY
CLOTH, ACIDS OR OTHER AGGRESSIVE MEDIA.
IMPERFECT CLEANING PREVENTS THE CORRECT POSITIONING OF THE TOOL-HOLDER, WITH
SERIOUS CONSEQUENCES FOR THE SAFETY OF THE OPERATOR, THE WEAR AND TEAR OF
THE ELECTROSPINDLE AND TOOLHOLDER, THE PRECISION AND EFFICIENCY OF THE
MACHINING OPERATION.
32
    "